| ausmini https://www.ausmini.com/forums/ |
|
| Lockheed 5 1/2" Vacuum Servo Service Manual https://www.ausmini.com/forums/viewtopic.php?f=25&t=98726 |
Page 1 of 1 |
| Author: | winabbey [ Sat Jun 29, 2019 4:13 pm ] |
| Post subject: | Lockheed 5 1/2" Vacuum Servo Service Manual |
This is for the brake servo fitted to the Australian assembled Mark 1 and some early MK II Cooper S. The bore size for these is 5/8" diameter (no identifying grooves in the end of the slave cylinder body). Click on a page image to enlarge it. Attachment: Lockheed Servo Service Manual front cover.jpg Attachment: Lockheed Servo Service Manual frontspiece contents.jpg Attachment: Lockheed Servo Service Manual p01.jpg Attachment: Lockheed Servo Service Manual p03.jpg Attachment: Lockheed Servo Service Manual p04.jpg Attachment: Lockheed Servo Service Manual p05.jpg Attachment: Lockheed Servo Service Manual p06.jpg Attachment: Lockheed Servo Service Manual p07.jpg Attachment: Lockheed Servo Service Manual p08.jpg Attachment: Lockheed Servo Service Manual p09.jpg Attachment: Lockheed Servo Service Manual p10.jpg Attachment: Lockheed Servo Service Manual p11.jpg Attachment: Lockheed Servo Service Manual p12.jpg Attachment: Lockheed Servo Service Manual p13.jpg Attachment: Lockheed Servo Service Manual rear cover.jpg
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|