Ausmini
It is currently Mon Apr 29, 2024 12:29 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: The new GE
PostPosted: Fri Dec 17, 2004 2:57 pm 
Offline
teh admin God
teh admin God
User avatar

Joined: Sat Mar 20, 2004 12:25 pm
Posts: 3932
Location: Smitho, Tassie
mini
Image
Image
Image

I am a wally.
It is worse than what it looks
I just got owned to the tune of 200 hard earned Bucks
The guy is laughing


Oh well it goes good apparently, when i put a new clutch in it. Any hints.
And the rust hole. How to fix? Surely something this bad has been fixed before

Its 1977 TC and its a real shitbox to put it politley.
Demo derby car here i come Win a Grand, and make a profit

_________________
Sir Namibian CAMEL of MONGOLIA !!!
Vrilen Snyson Racing: Finding us all a Vrilen
Asparagus: Experience the versatility


Top
 Profile  
 
 Post subject:
PostPosted: Sun Dec 19, 2004 7:42 pm 
Offline
teh admin God
teh admin God
User avatar

Joined: Sat Mar 20, 2004 12:25 pm
Posts: 3932
Location: Smitho, Tassie
So i had the gemmy started today. The mini batt got it to work. And i set to putting the foot down and making the engine work. It was so noisy and sounded extra sweet :lol: , it was great. The clutch is blown in it so it wont drive - but if the accelrator is flat to the floor the vehicle will move a few centimetres. :wink:

At least i know i can sell the engine for 50 bucks - it goes well. :twisted:

_________________
Sir Namibian CAMEL of MONGOLIA !!!
Vrilen Snyson Racing: Finding us all a Vrilen
Asparagus: Experience the versatility


Top
 Profile  
 
 Post subject:
PostPosted: Sun Dec 19, 2004 11:00 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Were the F is that Hole :idea:

_________________
Stop Licking the Dog...I Don't Care Who Started It


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 20, 2004 7:36 pm 
Offline
teh admin God
teh admin God
User avatar

Joined: Sat Mar 20, 2004 12:25 pm
Posts: 3932
Location: Smitho, Tassie
That hole is the left side of the boot. But the whole boot is pretty well gone too.
a friend gave me a super idea and i am going to have to go with it. Im going to cut the boot end off, the back end where the rust is, and weld some of that corrigated iron sheeting over the back of it. I think that will be funny. :wink:

_________________
Sir Namibian CAMEL of MONGOLIA !!!
Vrilen Snyson Racing: Finding us all a Vrilen
Asparagus: Experience the versatility


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 17, 2005 10:03 am 
Offline
848cc
848cc
User avatar

Joined: Tue Jan 11, 2005 9:55 am
Posts: 93
Location: sydney, Aus
wow!

that lloks like it might have had a bath at some stage (?) Pity. car looked pretty clean other than that.

options:
put the carpet back and pretend you don't know about it. :wink:
fix it...... :roll:
paddock thrash it :D looks like you've got some good paddocks.

_________________
anything is possible - if you don't know what you're talking about.
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 17, 2005 7:19 pm 
Offline
teh admin God
teh admin God
User avatar

Joined: Sat Mar 20, 2004 12:25 pm
Posts: 3932
Location: Smitho, Tassie
ohh

so i just reaslied that this section of the forum is about the new MINI, not just a new mini :oops: :wink:

_________________
Sir Namibian CAMEL of MONGOLIA !!!
Vrilen Snyson Racing: Finding us all a Vrilen
Asparagus: Experience the versatility


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jan 18, 2005 1:47 pm 
Offline
848cc
848cc
User avatar

Joined: Tue Jan 11, 2005 9:55 am
Posts: 93
Location: sydney, Aus
it did take some thinking about. :?, but then I got it. :idea:

you've bought a new GE-mini. :roll:

_________________
anything is possible - if you don't know what you're talking about.
Image


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 21, 2005 8:38 pm 
Offline
teh admin God
teh admin God
User avatar

Joined: Sat Mar 20, 2004 12:25 pm
Posts: 3932
Location: Smitho, Tassie
There never was any doubt that the GE was going to be a paddock basher, save the mini from being hammered in the paddock :lol: , And it does get a hammering :( .
Well the car has been up on ramps for weeks waiting for me and mates, if/when they come around, to hack at the clutch and try to shove another one in it.

So that will be fun :wink:

_________________
Sir Namibian CAMEL of MONGOLIA !!!
Vrilen Snyson Racing: Finding us all a Vrilen
Asparagus: Experience the versatility


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 26, 2005 9:37 pm 
Offline
teh admin God
teh admin God
User avatar

Joined: Sat Mar 20, 2004 12:25 pm
Posts: 3932
Location: Smitho, Tassie
Took to the gemini with a spanner . didnt know what i was doing. I just pulled poked screwed bashed anything that looked like it needed pulling poking crewing or bashing. I took all the bolts out around near the engine near the clutch place, and then i did all the bolts around near the gearbox, seeing if i could just plonk it out! :shock: But it didnt go, So tomorrow i will need to give it a bashin so it will fall out :wink:

_________________
Sir Namibian CAMEL of MONGOLIA !!!
Vrilen Snyson Racing: Finding us all a Vrilen
Asparagus: Experience the versatility


Top
 Profile  
 
 Post subject:
PostPosted: Tue Mar 01, 2005 12:05 pm 
Offline
1275cc
1275cc
User avatar

Joined: Fri Oct 29, 2004 6:14 pm
Posts: 4963
Location: A pub near Geelong
Namibian CAMEL wrote:
ohh

so i just reaslied that this section of the forum is about the new MINI, not just a new mini :oops: :wink:


nice one mate

_________________
78 Leyland Mini - Prince


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 40 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.