| ausmini https://www.ausmini.com/forums/ |
|
| Window Regulator https://www.ausmini.com/forums/viewtopic.php?f=4&t=86956 |
Page 1 of 1 |
| Author: | Minimadmarty [ Thu Aug 21, 2014 8:27 am ] |
| Post subject: | Window Regulator |
I've sold my Bini subject to repairing / replacing the passenger side window regulator (it packed up the morning someone came to look at it!). The Auto Electrician is quoting $800 to fit and replace. I can get a new genuine BMW left side regulator on eBay for $200. How hard are they to fit yourself? Has anyone done it and have any advise / tips? Cheers in advance 
|
|
| Author: | junior [ Thu Aug 21, 2014 12:58 pm ] |
| Post subject: | Re: Window Regulator |
here's a how to: http://www.pelicanparts.com/techarticle ... cement.htm |
|
| Author: | realmini [ Thu Aug 21, 2014 2:55 pm ] |
| Post subject: | Re: Window Regulator |
If it not working due to the electric motor you can pull the motor off the reg solder in new brushes or clean them up & Bobs ya uncle |
|
| Author: | Minimadmarty [ Fri Aug 22, 2014 1:53 pm ] |
| Post subject: | Re: Window Regulator |
junior wrote: here's a how to: http://www.pelicanparts.com/techarticle ... cement.htm Cheers junior, After reading this and following up until step 13 I took a beer break and then found this YouTube video https://m.youtube.com/watch?v=HsiWNyXXSCw Worked a treat and saved me a whole heap of cash
|
|
| Author: | Mick [ Fri Aug 22, 2014 2:02 pm ] |
| Post subject: | Re: Window Regulator |
This should be in the How-To |
|
| Author: | Minimadmarty [ Fri Aug 22, 2014 2:07 pm ] |
| Post subject: | Re: Window Regulator |
Brilliant Mick, I think I have an old impact driver I could use
|
|
| Author: | boomini [ Fri Aug 22, 2014 8:54 pm ] |
| Post subject: | Re: Window Regulator |
Hey marty... $599 and I will fit it for you. Think of the savings you will make.... lol |
|
| Author: | Minimadmarty [ Fri Aug 22, 2014 10:57 pm ] |
| Post subject: | Re: Window Regulator |
boomini wrote: Hey marty... $599 and I will fit it for you. Think of the savings you will make.... lol I fixed it for free and now the a Bini has gone  JCW here I come Although I was at Barbagallo's this afternoon looking at new Range Rovers!
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|