I have the redline manifold and am just waiting for the gasket kit and carb to arrive, and was wondering if the linkage kit from redline would work? Is the linkage kit for the weber and dellorto the same?

Thanks in advance

I got a Lynx Weber linkage kit on my Dellorto- so yeah, I think so. Only variation would be the arm on the carb.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Thanks Kev

Here's a pic of mine- linkage is at least 10 years old, all I've replaced since is the black plastic rod ends (rose joints) that hold the horizontal shaft (one broke at Wakefield Pk and I drove home using a virtual bearing made of cable ties..)
Now it has proper steel joints.

Kit was on a Lynx manifold before I swapped to the Redline one.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.