ausmini
https://www.ausmini.com/forums/

ram tubes for SU
https://www.ausmini.com/forums/viewtopic.php?f=5&t=1635		 Page 2 of 3
Author:  Lillee [ Thu Aug 26, 2004 4:11 pm ]
Post subject: 
err what the heck is a stubb stack? :? and more importantly do I need some?? :lol:
Author:  drmini in aust [ Thu Aug 26, 2004 6:54 pm ]
Post subject: 
Chong,
Get thee a copy of Mr Vizard's bible- `Tuning BL's A Series engine'.

On P57 (my old copy) in the section on ram charging, it shows various ram pipe shapes.

I copied this one (sort-of) from the bottom pic, it gives 5.8% more flow than a carb without it.
Also it improves low speed and mid range mixture control, on a Weber or Dellorto. :wink:
Author:  Anto [ Thu Aug 26, 2004 7:27 pm ]
Post subject: 
Sweet Kevin put me down for a set for my 40. :)
Author:  Lillee [ Thu Aug 26, 2004 9:33 pm ]
Post subject: 
Am I getting one for my dellorto??? :wink:

I saw that Vizard book at a motorsport book shop in town for $60, worth it?
Author:  drmini in aust [ Thu Aug 26, 2004 10:30 pm ]
Post subject: 
68Delux wrote:
Am I getting one for my dellorto??? :wink:

I saw that Vizard book at a motorsport book shop in town for $60, worth it?


Yes I'll make you some I guess. Won't be free though- I gotta buy the alloy bar.

$60 is the price of that book on the web at www.pitstop.net.au but if you buy it in town you will save freight. :wink:
Author:  Mike [ Fri Aug 27, 2004 2:08 am ]
Post subject: 
68 just dont confuse it with Vizard's earlier "how to modify your mini".

Doc could you put me down for 2 45's?

I've got a pair of the tiny 1 1/4 inch stacks that go inside the K & N filter. When one of them cracked I've tried to find some more but everyone seems to think they dont exist as Kevin said. (Minispares only do 1 1/2). So we had to weld the existing one.
Author:  drmini in aust [ Fri Aug 27, 2004 5:15 am ]
Post subject: 
Mike wrote:
68 just dont confuse it with Vizard's earlier "how to modify your mini".

Doc could you put me down for 2 45's?

I've got a pair of the tiny 1 1/4 inch stacks that go inside the K & N filter. When one of them cracked I've tried to find some more but everyone seems to think they dont exist as Kevin said. (Minispares only do 1 1/2). So we had to weld the existing one.


Yep, 2x45s.

I just gotta work out total numbers, then buy some 70mm alloy bar... :wink:
Author:  Lillee [ Fri Aug 27, 2004 9:21 am ]
Post subject: 
Oh so I need 'Tuning BL's A Series engine' not 'how to modify your mini'

I'll have to check at lunchtime which it is...

[EDIT] This one right? http://www.pitstop.net.au/pitstop/prog/ ... M&PLU=8858
Author:  Lillee [ Fri Aug 27, 2004 9:24 am ]
Post subject: 
Sorry thommo09 for hijacking the thread :shock: :(
Author:  thommo09 [ Fri Aug 27, 2004 11:04 am ]
Post subject: 
lol...no problemo dude :)

i also want to know which vizard book is the better one? isnt the 'how to modify your mini' book very similar to the "tuning bls a series" only with info about suspension, etc??

basically, which should i buy first....cos u know...i cant afford both at once :cry:
Author:  drmini in aust [ Fri Aug 27, 2004 4:12 pm ]
Post subject: 
Get the Tuning BL's A series engine one first. More in it. 8)

Buy HTMYM if you ever get to the end of the big one...
Author:  Lillee [ Fri Aug 27, 2004 4:18 pm ]
Post subject: 
Oh the one listed above is massive! It's truly an encyclopedia and definately the one to get thommo, $60
Author:  Anto [ Fri Aug 27, 2004 7:25 pm ]
Post subject: 
Remember, they don't call it the bible for nothing :lol: Highly recommended - there ARE other good books about, but Vizard is the be-all and end-all ;)
Author:  drmini in aust [ Tue Aug 31, 2004 10:46 pm ]
Post subject: 
spathi wrote:
id like two 40's if possible Dr :)


See the new thread in Mini Mods. :)
Author:  drmini in aust [ Wed Sep 08, 2004 7:43 pm ]
Post subject: 
Here are the K&N stubstacks I mentioned above.
I reckon they would work inside other SU filters too.

Link is to MiniSpares new (hush, hush!) site.. 8)
Enjoy!

http://ms-staging.complete.co.uk/Product.aspx?pid=33713
Page 2 of 3 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/