ausmini https://www.ausmini.com/forums/ |
|
ram tubes for SU https://www.ausmini.com/forums/viewtopic.php?f=5&t=1635 |
Page 2 of 3 |
Author: | Lillee [ Thu Aug 26, 2004 4:11 pm ] |
Post subject: | |
err what the heck is a stubb stack? and more importantly do I need some?? |
Author: | drmini in aust [ Thu Aug 26, 2004 6:54 pm ] |
Post subject: | |
Chong, Get thee a copy of Mr Vizard's bible- `Tuning BL's A Series engine'. On P57 (my old copy) in the section on ram charging, it shows various ram pipe shapes. I copied this one (sort-of) from the bottom pic, it gives 5.8% more flow than a carb without it. Also it improves low speed and mid range mixture control, on a Weber or Dellorto. |
Author: | Anto [ Thu Aug 26, 2004 7:27 pm ] |
Post subject: | |
Sweet Kevin put me down for a set for my 40. |
Author: | Lillee [ Thu Aug 26, 2004 9:33 pm ] |
Post subject: | |
Am I getting one for my dellorto??? I saw that Vizard book at a motorsport book shop in town for $60, worth it? |
Author: | drmini in aust [ Thu Aug 26, 2004 10:30 pm ] |
Post subject: | |
68Delux wrote: Am I getting one for my dellorto???
I saw that Vizard book at a motorsport book shop in town for $60, worth it? Yes I'll make you some I guess. Won't be free though- I gotta buy the alloy bar. $60 is the price of that book on the web at www.pitstop.net.au but if you buy it in town you will save freight. |
Author: | Mike [ Fri Aug 27, 2004 2:08 am ] |
Post subject: | |
68 just dont confuse it with Vizard's earlier "how to modify your mini". Doc could you put me down for 2 45's? I've got a pair of the tiny 1 1/4 inch stacks that go inside the K & N filter. When one of them cracked I've tried to find some more but everyone seems to think they dont exist as Kevin said. (Minispares only do 1 1/2). So we had to weld the existing one. |
Author: | drmini in aust [ Fri Aug 27, 2004 5:15 am ] |
Post subject: | |
Mike wrote: 68 just dont confuse it with Vizard's earlier "how to modify your mini".
Doc could you put me down for 2 45's? I've got a pair of the tiny 1 1/4 inch stacks that go inside the K & N filter. When one of them cracked I've tried to find some more but everyone seems to think they dont exist as Kevin said. (Minispares only do 1 1/2). So we had to weld the existing one. Yep, 2x45s. I just gotta work out total numbers, then buy some 70mm alloy bar... |
Author: | Lillee [ Fri Aug 27, 2004 9:21 am ] |
Post subject: | |
Oh so I need 'Tuning BL's A Series engine' not 'how to modify your mini' I'll have to check at lunchtime which it is... [EDIT] This one right? http://www.pitstop.net.au/pitstop/prog/ ... M&PLU=8858 |
Author: | Lillee [ Fri Aug 27, 2004 9:24 am ] |
Post subject: | |
Sorry thommo09 for hijacking the thread |
Author: | thommo09 [ Fri Aug 27, 2004 11:04 am ] |
Post subject: | |
lol...no problemo dude i also want to know which vizard book is the better one? isnt the 'how to modify your mini' book very similar to the "tuning bls a series" only with info about suspension, etc?? basically, which should i buy first....cos u know...i cant afford both at once |
Author: | drmini in aust [ Fri Aug 27, 2004 4:12 pm ] |
Post subject: | |
Get the Tuning BL's A series engine one first. More in it. Buy HTMYM if you ever get to the end of the big one... |
Author: | Lillee [ Fri Aug 27, 2004 4:18 pm ] |
Post subject: | |
Oh the one listed above is massive! It's truly an encyclopedia and definately the one to get thommo, $60 |
Author: | Anto [ Fri Aug 27, 2004 7:25 pm ] |
Post subject: | |
Remember, they don't call it the bible for nothing Highly recommended - there ARE other good books about, but Vizard is the be-all and end-all |
Author: | drmini in aust [ Tue Aug 31, 2004 10:46 pm ] |
Post subject: | |
spathi wrote: id like two 40's if possible Dr
See the new thread in Mini Mods. |
Author: | drmini in aust [ Wed Sep 08, 2004 7:43 pm ] |
Post subject: | |
Here are the K&N stubstacks I mentioned above. I reckon they would work inside other SU filters too. Link is to MiniSpares new (hush, hush!) site.. Enjoy! http://ms-staging.complete.co.uk/Product.aspx?pid=33713 |
Page 2 of 3 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |