ausmini • View topic - Starter and flywheel problem

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours

Starter and flywheel problem

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

anza

Post subject: Starter and flywheel problem

Posted: Fri Apr 01, 2016 10:08 am

848cc

Joined: Sun Jan 25, 2015 9:56 am
Posts: 8

I have a Hitachi s114-202 starter (Gemini type) with 9 teeth on my mini that i am restoring. The 107 tooth flywheel is damaged and replacing it with a 129 tooth flywheel. I think it requires an 11 tooth pinion drive for correct meshing? Is this correct ? If not can anyone tell me what I require to do to suit it. Thanks you for your help.

Top

drmini in aust

Post subject: Re: Starter and flywheel problem

Posted: Fri Apr 01, 2016 3:38 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39642
Location: near Baulkham Hills, NSW

If you use the later 129 tooth ring gear the Hitachi won't work. You will need a Rover pre-engaged starter.
Why not fit a new 107T one and keep the Hitachi starter you have?

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

Page 1 of 1

[ 2 posts ]

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 13 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: