ausmini https://www.ausmini.com/forums/ |
|
ECU tuning for an spi rover https://www.ausmini.com/forums/viewtopic.php?f=5&t=92828 |
Page 1 of 1 |
Author: | doctorlenny [ Mon Jun 06, 2016 11:58 am ] |
Post subject: | ECU tuning for an spi rover |
Hi, Does anybody know anything about these? http://twinkam.co.uk/epages/191f6b26-60 ... cts/SC0127 Thanks, Lenny |
Author: | doctorlenny [ Wed Jun 15, 2016 1:42 pm ] |
Post subject: | Re: ECU tuning for an spi rover |
Or any other way I can tune the ECU? |
Author: | KLAS [ Wed Jun 15, 2016 10:28 pm ] |
Post subject: | Re: ECU tuning for an spi rover |
with the factory ecu you can adjust fuel and spark within limits why do you want to tune the ecu/a differend ecu? heavily modded engine? |
Author: | doctorlenny [ Thu Jun 16, 2016 12:00 pm ] |
Post subject: | Re: ECU tuning for an spi rover |
KLAS wrote: with the factory ecu you can adjust fuel and spark within limits why do you want to tune the ecu/a differend ecu? heavily modded engine? Not yet, but I am keen to get her going a bit faster, head, cam etc. But don't want to waste time and money on it if she's going to be limited by the ECU. |
Author: | KLAS [ Thu Jun 16, 2016 3:26 pm ] |
Post subject: | Re: ECU tuning for an spi rover |
the factory ecu runs very well up to 80-85 HP. if you aim for more you should consider an aftermarket ecu |
Author: | Babes [ Thu Jun 16, 2016 8:21 pm ] |
Post subject: | Re: ECU tuning for an spi rover |
I have a haltech 500 for sale if your interested, less than 12 months old but had to upgrade to the 750 to run flex fuel sensor |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |