ausmini https://www.ausmini.com/forums/ |
|
Door handles for a mk1 cooper s https://www.ausmini.com/forums/viewtopic.php?f=5&t=93098 |
Page 1 of 1 |
Author: | oldblade [ Sat Jul 09, 2016 6:45 pm ] |
Post subject: | Door handles for a mk1 cooper s |
Does anyone know if these will fit as per my other post my drivers door handle just snapped off http://minispares.com/product/Classic/Body/Doors/Locks/24A1140KIT.aspx?030403&ReturnUrl=/product/Classic/Body/Doors/Locks/CZH1785.aspx|Back%20to |
Author: | snurkdog [ Sat Jul 09, 2016 8:34 pm ] |
Post subject: | Re: Door handles for a mk1 cooper s |
S.ee if you can get a length for the handle, early minis had a shorter handle than deluxe and K, They may be the shorter ones. chased this up once but can,t recall. |
Author: | oldblade [ Sat Jul 09, 2016 9:19 pm ] |
Post subject: | Re: Door handles for a mk1 cooper s |
i'll see if i can get some details |
Author: | oldblade [ Sat Jul 09, 2016 9:28 pm ] |
Post subject: | Re: From the Archive - Keyed Mini Passenger Door Option |
So is this one of these http://minispares.com/product/Classic/Body/Doors/Locks/24A1140.aspx http://minispares.com/product/classic/24A1140KIT.aspx |
Author: | mini_fanatic [ Sat Jul 09, 2016 9:42 pm ] |
Post subject: | Re: From the Archive - Keyed Mini Passenger Door Option |
oldblade wrote: So is this one of these Not quite, that's for sliding window cars. The one you're after is Australian wind-up, neither side are available new. [Post edited for clarity after being moved from another thread]. |
Author: | oldblade [ Sat Jul 09, 2016 9:54 pm ] |
Post subject: | Re: From the Archive - Keyed Mini Passenger Door Option |
I have just had mu door in bits due to snapping my handle and by the looks of it the difference is the shaft length. Could you not cut down the shaft to suit ? |
Author: | Matt I [ Sat Jul 09, 2016 9:57 pm ] |
Post subject: | Re: From the Archive - Keyed Mini Passenger Door Option |
oldblade wrote: I have just had mu door in bits due to snapping my handle and by the looks of it the difference is the shaft length. Could you not cut down the shaft to suit ? Sliding window handles are a slightly different shape, and too short to line up with the plastic bumper on the door. |
Author: | oldblade [ Sat Jul 09, 2016 10:00 pm ] |
Post subject: | Re: From the Archive - Keyed Mini Passenger Door Option |
Matt I wrote: oldblade wrote: I have just had mu door in bits due to snapping my handle and by the looks of it the difference is the shaft length. Could you not cut down the shaft to suit ? Sliding window handles are a slightly different shape, and too short to line up with the plastic bumper on the door. Bugger there goes that idea |
Author: | drmini in aust [ Sun Jul 10, 2016 11:03 pm ] |
Post subject: | Re: Door handles for a mk1 cooper s |
Can't buy new Oz ones now, these were not used in UK, best you can hope for is a good s/h one. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |