ausmini https://www.ausmini.com/forums/ |
|
Head gasket recommendation for 998 80 thou over https://www.ausmini.com/forums/viewtopic.php?f=5&t=94082 |
Page 1 of 1 |
Author: | ClintW [ Thu Oct 27, 2016 2:18 pm ] |
Post subject: | Head gasket recommendation for 998 80 thou over |
Hi all, having a head gasket issue on 998 .080" oversized bore. Blowing the gasket between 3&4. Anyone recommend what head gasket to use. Thanks. |
Author: | Scoop [ Thu Oct 27, 2016 4:40 pm ] |
Post subject: | Re: Head gasket recommendation for 998 80 thou over |
Make sure that both the head and block surfaces are dead flat. Type of gasket unsure though, ACL used to be the go but they are no longer made |
Author: | 69k1100 [ Thu Oct 27, 2016 7:13 pm ] |
Post subject: | Re: Head gasket recommendation for 998 80 thou over |
http://www.youtube.com/watch?v=XEaRMR-RZPo Janspeed thought fuse wire could sort the issue, never really heard of this working first hand. |
Author: | drmini in aust [ Thu Oct 27, 2016 9:36 pm ] |
Post subject: | Re: Head gasket recommendation for 998 80 thou over |
I used a 1275 gasket on a 68mm bore 998 with a 12G202 head, but a few water holes had to be moved in head and block. |
Author: | ClintW [ Fri Oct 28, 2016 8:32 am ] |
Post subject: | Re: Head gasket recommendation for 998 80 thou over |
Thanks for the advice. Might explore the 1275 option further. I've heard that they will fit with some modification to align water jacket |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |