| ausmini https://www.ausmini.com/forums/ |
|
| Valve seals https://www.ausmini.com/forums/viewtopic.php?f=5&t=96333 |
Page 1 of 1 |
| Author: | 70K1100 [ Mon Nov 20, 2017 10:47 am ] |
| Post subject: | Valve seals |
Can anyone tell me if these seals will fit under AEA-525 valve springs? https://minikingdomonline.com.au/wp-con ... DU4905.jpg |
|
| Author: | simon k [ Mon Nov 20, 2017 11:33 am ] |
| Post subject: | Re: Valve seals |
yep |
|
| Author: | 70K1100 [ Mon Nov 20, 2017 12:48 pm ] |
| Post subject: | Re: Valve seals |
Thank you. |
|
| Author: | drmini in aust [ Tue Nov 21, 2017 9:28 pm ] |
| Post subject: | Re: Valve seals |
simon k wrote: yep I agree. But watch the height of the guides. If much more than 1.5mm above the top of the head, and you are running 1.5 rockers and a big cam, they can get hit by the valve caps and the little springs come off. As I found on one build. |
|
| Author: | 70K1100 [ Thu Nov 23, 2017 11:40 am ] |
| Post subject: | Re: Valve seals |
Planning on std rockers and 266 cam. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
