ausmini https://www.ausmini.com/forums/ |
|
The “Remrod” https://www.ausmini.com/forums/viewtopic.php?f=5&t=96429 |
Page 2 of 2 |
Author: | Silobin [ Sat Dec 23, 2017 8:23 am ] |
Post subject: | Re: The “Remrod” |
pfmmini wrote: Thanks mate, I go to Canberra a few times during the year, so now know where you are. Any timetable on a prototype? Cheers Paul M I’ll be working on the prototype this week (I’m on holiday, but this is my hobbie so it’s ok). Hopefully by the end of January I’ll have a functioning prototype. One problem I’ve faced is the uni joints, I’m not very happy with the quality |
Author: | Silobin [ Thu Jan 04, 2018 7:12 pm ] |
Post subject: | Re: The “Remrod” |
A little update, still a long way to go but the basic structure is there... |
Author: | Silobin [ Thu Jan 04, 2018 7:18 pm ] |
Post subject: | Re: The “Remrod” |
A few more pics... |
Author: | timmy201 [ Thu Jan 04, 2018 8:06 pm ] |
Post subject: | Re: The “Remrod” |
Nicely done! |
Author: | coopar [ Fri Jan 05, 2018 7:26 pm ] |
Post subject: | Re: The “Remrod” |
+1 Sent from my HTC_PN071 using Tapatalk |
Author: | pfmmini [ Tue Feb 06, 2018 10:08 pm ] |
Post subject: | Re: The “Remrod” |
Hi Silobin, any progress. Looks like you also have a KAD short shift the same as mine. Happy to come up with a deposit if that helps your costs. Cheers Paul M |
Author: | Silobin [ Mon Feb 12, 2018 5:41 pm ] |
Post subject: | Re: The “Remrod” |
Hi Paul. I’m in Hokkaido for a few weeks holiday so there’s no progress at the moment. And to be honest, even if I raced on and finished the remrod I still need to finish my mini before I can fully test it and report any real-world benefits. Realistically I expect to be at that point by October’ish Regards, Silas |
Author: | pfmmini [ Mon Feb 12, 2018 10:13 pm ] |
Post subject: | Re: The “Remrod” |
Thanks Silas, I'll keep in touch. Van looks good so will watch its progress. Paul M |
Author: | Silobin [ Sun Apr 28, 2019 7:18 pm ] |
Post subject: | Re: The “Remrod” |
Progress continues... |
Author: | braad [ Fri May 17, 2019 7:18 am ] |
Post subject: | Re: The “Remrod” |
Silobin wrote: Progress continues... That looks great Silobin. Seems to fit nicely with the exhaust. Is that 2 inch like you mentioned in the original requirements?I'm guessing a test drive with the remrod in place isn't too far off? Sent from my SM-G950F using Tapatalk |
Author: | Silobin [ Sat May 18, 2019 10:08 pm ] |
Post subject: | Re: The “Remrod” |
braad wrote: Silobin wrote: Progress continues... That looks great Silobin. Seems to fit nicely with the exhaust. Is that 2 inch like you mentioned in the original requirements?I'm guessing a test drive with the remrod in place isn't too far off? Sent from my SM-G950F using Tapatalk Thanks! Yep the exhaust is 2”. I’m nearly ready for rego, the shifter has a great feel and hopefully will be worth all all the effort |
Page 2 of 2 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |