ausmini
https://www.ausmini.com/forums/

Morris 1100S blocks
https://www.ausmini.com/forums/viewtopic.php?f=5&t=97739
Page 1 of 1

Author:  LRX [ Thu Sep 06, 2018 7:05 pm ]
Post subject:  Morris 1100S blocks

I have acquired a couple of 1100S blocks. The blocks with no Cooper S back plates. Were they all thin, thick or a mixture of flanges? Cheers.

Author:  timmy201 [ Thu Sep 06, 2018 7:15 pm ]
Post subject:  Re: Morris 1100S blocks

Mix. Also some were large journal cranks and some were small

Author:  drmini in aust [ Thu Sep 13, 2018 7:27 am ]
Post subject:  Re: Morris 1100S blocks

Thin flange ones all had the small journal crank and S rods. So did early thick flange ones. From around 12YDTaH10500 they got the big journal crank and heavy lump rods.
Even the thin flange ones are much stiffer than a Cooper S block.
No need to tap flange holes bigger IMO. They don't leak there.

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/