| ausmini https://www.ausmini.com/forums/ |
|
| Performance Cylinder Head https://www.ausmini.com/forums/viewtopic.php?f=5&t=98283 |
Page 1 of 1 |
| Author: | slide [ Tue Feb 19, 2019 3:22 pm ] |
| Post subject: | Performance Cylinder Head |
As part of my Cooper S rebuild project, I’m going to be needing a decent stage 3/4? road/race spec 5 port iron cylinder head. Apart from Graham Russell who else in Australia can supply a performance 1275 head suitably modified with quality 35/29 valves, port and polished chambers, magnesium bronze guides, double valve springs, etc? I have heard Martini has a good reputation but not seen any of their work first hand. Or should I seek to procure one from the likes of MED, Slark, Calver (does he still do the MS heads?), more costly no doubt but presumably top notch stuff. Any recommendations? |
|
| Author: | Minicooper4me [ Tue Feb 19, 2019 8:27 pm ] |
| Post subject: | Re: Performance Cylinder Head |
Go for the trusted GR product. Results speaks for itself a million times over. |
|
| Author: | 850man [ Wed Feb 20, 2019 7:17 am ] |
| Post subject: | Re: Performance Cylinder Head |
Minicooper4me wrote: Go for the trusted GR product. Results speaks for itself a million times over. Or any of the other trusted cylinder head specialists in Australia. Link Automotive (A & B series specialists) Martini Heads (A & B series specialists) Racepoint Developments ( A & B series specialists ) Powerplay ( A & B series specialists ) British Sporting cars (A & B series specialists) Head Stud Developments Tate Engines Alex Katsikas ( A series specialist ) Wilson Automotive (A & B series specialist ) Advanced Engine Dynamics Etc. There are many professional A series cylinder head specialists in Melbourne. |
|
| Author: | slide [ Wed Feb 20, 2019 12:10 pm ] |
| Post subject: | Re: Performance Cylinder Head |
Thanks, I don't have a 1275 head to supply/send to be modified so am looking to buy one that is already modified. |
|
| Author: | gtogreen1969 [ Wed Feb 20, 2019 1:53 pm ] |
| Post subject: | Re: Performance Cylinder Head |
There is one on FB. https://www.facebook.com/marketplace/it ... 548639683/ BMC mini 1275 modified cylinder head, converted to 11 stud, high flow ports this head will suit hot road to race applications will be supplied with new 1.4 inlet valves and 1.180 ex valves, will be set up with new springs to suit the cam of your choice. $2300 Attachment: 51844928_2262224514065219_5200011003705688064_n.jpg
|
|
| Author: | goodie [ Fri Feb 22, 2019 5:58 am ] |
| Post subject: | Re: Performance Cylinder Head |
Have you seen this , as far as i'm aware it's still for sale . viewtopic.php?f=8&t=98144 |
|
| Author: | Toy444 [ Fri Feb 22, 2019 6:48 am ] |
| Post subject: | Re: Performance Cylinder Head |
Try Ian Fahey in Wollongong... |
|
| Author: | AWOODY [ Fri Feb 22, 2019 3:42 pm ] |
| Post subject: | Re: Performance Cylinder Head |
A second for Ian Fahey beautiful work but you will have to source a head . |
|
| Author: | sako [ Fri Feb 22, 2019 8:21 pm ] |
| Post subject: | Re: Performance Cylinder Head |
Anyone used minspares and repairs in Seaford Victoria? |
|
| Author: | Ian_B [ Sun Feb 24, 2019 5:08 pm ] |
| Post subject: | Re: Performance Cylinder Head |
Someone who has the passion to put hours in on a flowbench and research one type of head . |
|
| Author: | Ian_B [ Tue Feb 26, 2019 8:24 pm ] |
| Post subject: | Re: Performance Cylinder Head |
That pic posted looks much like a Vizarded head. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|