ausmini https://www.ausmini.com/forums/ |
|
Turbo time https://www.ausmini.com/forums/viewtopic.php?f=5&t=98682 |
Page 3 of 3 |
Author: | Chris.Williams [ Fri Jul 19, 2019 6:59 pm ] |
Post subject: | Re: Turbo time |
Distributor turned up from Avonbar racing in the Uk today. One more piece of the puzzle |
Author: | lomin [ Sat Jul 20, 2019 8:38 pm ] |
Post subject: | Re: Turbo time |
Hi, what features do Avonbar offer with their distributor , and what total timing do they suggest ? Any boost retard ? Cheers Lindsay |
Author: | Chris.Williams [ Sun Jul 21, 2019 12:19 pm ] |
Post subject: | Re: Turbo time |
lomin wrote: Hi, what features do Avonbar offer with their distributor , and what total timing do they suggest ? Any boost retard ? Cheers Lindsay Basically they asked what boost I’ll be running and set it to suit. So mines optimised for 8-10 psi From their site: Turbo Electronic Distributor.Special advance curve for modified engines running higher boost than standard.Fully modified advance curve to suit Hi-boost applications. As used by us on all our modified Turbo engines. We now produce 3 different distributors 6-8 Psi - 8-10 Psi _ 10-14 Psi Please state boost when ordering. NOTE: Above 14 Psi we recommend Polestar or similar management systems. |
Author: | Chris.Williams [ Fri Jul 26, 2019 5:01 am ] |
Post subject: | Re: Turbo time |
Head gasket, turbo oil hose new studs arrived today, time to get busy. |
Author: | Chris.Williams [ Sat Aug 10, 2019 5:46 pm ] |
Post subject: | Re: Turbo time |
So all parts are present and accounted for. Will begin the task |
Author: | Chris.Williams [ Thu Aug 22, 2019 4:18 pm ] |
Post subject: | Re: Turbo time |
Painted head and mounted turbo to manifold finally. Also got the bolts for mounting the plenum to my carb.... forgot to snap a pic of that though Attachment: 7BF5862A-A556-4A37-914D-94ED4E7E216C.jpeg Attachment: 9EBE6ADD-65D0-40C1-8B48-A8A4F2D1B103.jpeg
|
Author: | Chris.Williams [ Mon Aug 26, 2019 8:06 pm ] |
Post subject: | Re: Turbo time |
Pulled my engine out today, bolted a head on and dummy fit the turbo setup. Attachment: 599DF4EF-3ECC-49E7-B076-3B3DDA06D639.jpeg Attachment: 3B28E489-21F8-494D-99F9-DB515FBFFFF0.jpeg Attachment: A4A14267-AC80-44A6-AB2C-90EC4490E474.jpeg Attachment: 194CBE3E-BD25-4E33-8E9F-D565D1CC59AE.jpeg Tight fit Attachment: 99724A50-DDFA-4A3E-9A1F-A3D620B86004.jpeg But it does all fit, no fowling. Need to do oil feed and return lines now. |
Author: | Chris.Williams [ Wed Aug 28, 2019 3:47 pm ] |
Post subject: | Re: Turbo time |
Set the timing yesterday, Torqued down the head today, no time for much else |
Author: | timmy201 [ Thu Aug 29, 2019 11:31 am ] |
Post subject: | Re: Turbo time |
It’s a really neat manifold setup isn’t it? Looking forward to seeing your progress |
Author: | Morbo28 [ Wed Sep 11, 2019 8:32 pm ] |
Post subject: | Re: Turbo time |
Looking good. I'm doing a much longer-term, much reduced cost version I'll be interested to see how it comes along, with timing options etc. |
Author: | jpodge [ Sat Sep 14, 2019 5:05 pm ] |
Post subject: | Re: Turbo time |
Keen to see your oil feed and return set up. Looking really good. Well done!! |
Author: | Morbo28 [ Sat Sep 14, 2019 6:20 pm ] |
Post subject: | Re: Turbo time |
Chris.Williams wrote: Kennomini wrote: Cool, is their any concern about extra heat on the firewall? There has been no mention of it, but I’ll be applying some protective heat shielding to be safe. Considering a turbo blanket, doing more research first. Here's some of my heat mitigation... For my turbo build I'll also be adding turbo blanket too - I think that's a good call. Edit: also, I don't have a pic handy, but I use this stuff as heat shield, cut and bent as needed. |
Author: | Chris.Williams [ Fri Nov 01, 2019 6:59 pm ] |
Post subject: | Re: Turbo time |
Dropped the motor in to check fitment, no fowling so that’s a positive. Need to clock the turbo a touch more. Attachment: 02BF21FA-CF2D-45F7-A227-4D09DD754FE3.jpeg Attachment: F97B18EA-D4AE-4981-A727-F9FBE5D7587F.jpeg Done a mock up for the intercooler piping while I was at it. Attachment: ACCDB262-8663-4513-91C4-5CE11B6803AD.jpeg Attachment: 575E582C-A628-401A-B65B-C3F5C621DD61.jpeg
|
Author: | braad [ Thu Jan 23, 2020 6:48 am ] |
Post subject: | Re: Turbo time |
How’s this going Chris? Any progress from the mock up? |
Page 3 of 3 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |