ausmini https://www.ausmini.com/forums/ |
|
Forged cooper rocker arms https://www.ausmini.com/forums/viewtopic.php?f=5&t=99242 |
Page 1 of 1 |
Author: | pturnedge [ Mon Sep 09, 2019 10:32 pm ] |
Post subject: | Forged cooper rocker arms |
I was poking around some old parts I have in the garage on Sunday, I have an 1100 1970k running the 1098, with extractors single box rc40 system and 1 1/2" Su. Standard pressed rockers, I have a fully setup forged rocker setup on cast pedestals, the rockers are stamped 12G1222 the pedestals I can't read the number with my old eyes, but they look to be cast, not sintered. My question is, given the work involved for a road car, is there any value in changing mine to the forged rocker setup, or should I just flog them off? |
Author: | TK [ Tue Sep 10, 2019 11:58 am ] |
Post subject: | Re: Forged cooper rocker arms |
sell them mate |
Author: | drmini in aust [ Wed Sep 11, 2019 11:09 am ] |
Post subject: | Re: Forged cooper rocker arms |
Less valve lift than your present ones. Good for Cooper S originality, little else. |
Author: | pturnedge [ Sat Sep 14, 2019 8:01 am ] |
Post subject: | Re: Forged cooper rocker arms |
Thanks drmini, that is just the advice I was after. Appreciate it. |
Author: | Ian_B [ Fri Oct 25, 2019 10:04 pm ] |
Post subject: | Re: Forged cooper rocker arms |
I gave my mate some Keith Dodd Very good stuff |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |