Ausmini
It is currently Fri Mar 29, 2024 12:06 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 60 posts ]  Go to page Previous  1, 2, 3, 4  Next
Author Message
PostPosted: Fri Jan 31, 2020 10:29 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39621
Location: near Baulkham Hills, NSW
I've used 526 springs for years on road cars, no problems with GR's cams.
But years ago I took 4 lobes off a Camtech VP 3 cam in 30,000 miles using Penrite HPR30 oil....
Same springs.
I would only use 527s on a race motor.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
PostPosted: Fri Jan 31, 2020 8:11 pm 
Offline
998cc
998cc
User avatar

Joined: Thu Jun 17, 2010 8:55 pm
Posts: 695
Location: Central West
Attachment:
IMG_0643.JPG


Attachment:
IMG_0651.JPG


Attachment:
IMG_0573.JPG


You do not have the required permissions to view the files attached to this post.

_________________
1968 Morris Mini Deluxe - members gallery
1970 Morris Cooper S - members gallery
Mini's I grew up with
Slot car couch


Top
 Profile  
 
PostPosted: Sat Feb 01, 2020 3:54 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39621
Location: near Baulkham Hills, NSW
Rusty,
Were those valves small bore length, or from a 1275?
What springs? 526 or 527 are too long for small bore valves..

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
PostPosted: Sat Feb 01, 2020 6:48 am 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
Ouch!...Now that's what I call a dropped valve :!: :shock: Commiserations to Rusty :(

_________________
"Show me the Mini!"


Top
 Profile  
 
PostPosted: Sat Feb 01, 2020 10:40 am 
Offline
1275cc
1275cc
User avatar

Joined: Sun Apr 29, 2012 1:19 pm
Posts: 4336
Location: Wollongong, NSW
Hmm, I better double check which double springs I put in my 1098, and what length valves they are!

_________________
Image


Top
 Profile  
 
PostPosted: Sun Feb 02, 2020 5:19 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39621
Location: near Baulkham Hills, NSW
timmy201 wrote:
Hmm, I better double check which double springs I put in my 1098, and what length valves they are!


We used VSP580P double springs from Karcraft on Joe's 68mm bore (998 crank) motor.
Valves are 998 Cooper inlet, 27mm exhaust.
RE266SS camshaft.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
PostPosted: Sun Feb 02, 2020 6:24 am 
Offline
998cc
998cc
User avatar

Joined: Thu Jun 17, 2010 8:55 pm
Posts: 695
Location: Central West
drmini in aust wrote:
Rusty,
Were those valves small bore length, or from a 1275?
What springs? 526 or 527 are too long for small bore valves..
They were valve springs recommend to me at the time, I cannot remember exactly which model springs they were, maybe I have an invoice still which will list the part number, I will check.
Perhaps they were too long, could well explain it.

Sent from my moto g(6) using Tapatalk

_________________
1968 Morris Mini Deluxe - members gallery
1970 Morris Cooper S - members gallery
Mini's I grew up with
Slot car couch


Top
 Profile  
 
PostPosted: Sun Feb 02, 2020 7:33 am 
Offline
1275cc
1275cc
User avatar

Joined: Sun Apr 29, 2012 1:19 pm
Posts: 4336
Location: Wollongong, NSW
drmini in aust wrote:
timmy201 wrote:
Hmm, I better double check which double springs I put in my 1098, and what length valves they are!


We used VSP580P double springs from Karcraft on Joe's 68mm bore (998 crank) motor.
Valves are 998 Cooper inlet, 27mm exhaust.
RE266SS camshaft.

I did buy some VSP... springs from Karcraft but I’ll have to check which ones. The valves are 31.8/27.2 from GR, I assume they were small bore length but I’ll have to check that too

To be honest I didn’t even think about it when I ordered the springs

_________________
Image


Top
 Profile  
 
PostPosted: Sun Feb 02, 2020 10:10 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39621
Location: near Baulkham Hills, NSW
Tim, if they were double springs for a smallbore from KC, they are VSP580P.
Good for 7,000.
Their other VSP springs are singles for 803, 850, 998 and 1098.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
PostPosted: Sun Feb 02, 2020 10:33 am 
Offline
1275cc
1275cc
User avatar

Joined: Sun Apr 29, 2012 1:19 pm
Posts: 4336
Location: Wollongong, NSW
Oops. I’ve checked and I ordered VSP3964P# (7000rpm) - 1275 double valve springs. Will these be an issue with the 998/1098 valves? They are the GR Paul Ivy race valves, so they are a really nice valve, but will the fitted length of the 1275 springs be a problem?
Quote:
Small Bore valves – Race quality Paul Ivy Valves

Nitrided Stylite tipped, Polished, Excellent quality.
http://russellengineering.com.au/mini-products/

If the valve stems are the 998 length I’ll have to order some new 998 specific springs and swap them over? Hopefully there has been no damage in the last 1000km. I have the RPM limit set at 5750rpm, so I don't need super high rpm capable springs

_________________
Image


Top
 Profile  
 
PostPosted: Thu Feb 06, 2020 4:54 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Apr 29, 2012 1:19 pm
Posts: 4336
Location: Wollongong, NSW
I got the crank back from the shop today. The crack check showed no problems and it was good to go at 10/10 which was great news. The stroke measured up as 70.0mm

Here is a comparison of the short stroke 1100 and standard small bore 1100 cranks.
Attachment:
9CCF846D-66E0-43F0-AFF2-8FE6972536FE.jpeg

One of the appealing features of this crank is the overlap between the main journals (red lines) and the big ends (green lines). In combination with the large 1275 size journals, it makes a really strong crank :D
Attachment:
6CCCE7C3-8414-492B-BC7E-644F8EFD1BA2.jpeg


You do not have the required permissions to view the files attached to this post.

_________________
Image


Top
 Profile  
 
PostPosted: Thu Feb 06, 2020 7:20 pm 
Offline
1275cc
1275cc

Joined: Wed Jan 19, 2005 1:52 pm
Posts: 2571
Location: Brisbane
"I would only use 527s on a race motor"

I would not.

_________________
The bitterness of poor quality (or Crappy Workmanship) remains LONG AFTER the Sweet Taste of Low Price is forgotten.


Top
 Profile  
 
PostPosted: Thu Feb 06, 2020 8:38 pm 
Offline
Oh dear, worry, worry...

Joined: Fri Jun 19, 2009 5:31 pm
Posts: 686
Location: North Rocks
HI Tim
Those valves are longer than the small bore valves they will take the 1275 springs.
The spring height will be around 1.380 to 1.4 in those small bore heads.
Graham Russell

_________________
"It's better to be not informed than ill-informed"


Top
 Profile  
 
PostPosted: Thu Feb 06, 2020 8:47 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Apr 29, 2012 1:19 pm
Posts: 4336
Location: Wollongong, NSW
Thanks Graham, I was going to give you a call sometime. I had a vague memory you said to use the 1275 springs - these include the bottom collar for the double springs so I’ll see if I can measure them

_________________
Image


Top
 Profile  
 
PostPosted: Wed Apr 01, 2020 1:36 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15861
Location: Wodonga - Vic/NSW border
where did you get the crank? I'd love to build one of these motors

_________________
did I tell you that I won a trophy?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 60 posts ]  Go to page Previous  1, 2, 3, 4  Next

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.