Ausmini
It is currently Mon Jul 28, 2025 2:12 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Print view Previous topic | Next topic 
Author Message
GuamMini
PostPosted: Mon Sep 09, 2019 2:08 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 26, 2016 11:27 am
Posts: 365
Location: Mangilao, Guam
Finally decided to move the ignition coil where it belongs. However if I mount it where it should be the bottom is touching the connections and cover of the alternator unless I mount it way up high where the bracket for it is at the very bottom of the coil itself. There must be something odd the way it mounts with my coil and bracket. Can anyone see what is wrong?

Image

Image

Image

Image

_________________
1973 Clubman GT - YG2S8 1637
Top
 Profile  
 
sitnlo62
PostPosted: Mon Sep 09, 2019 7:55 pm 
Offline
998cc
998cc
User avatar

Joined: Tue Apr 11, 2006 8:15 am
Posts: 722
Location: Brisbane
Can you post some clearer photos Mate.
It is very hard ts see what is going on there with those photos.
However the coil does have to sit high enough to just clear the alternator. It is all a pretty tight fit
Show us some clear photos of your brackets and as much detail as you can.

_________________
Image
Top
 Profile  
 
GuamMini
PostPosted: Tue Sep 10, 2019 6:49 am 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 26, 2016 11:27 am
Posts: 365
Location: Mangilao, Guam
Thank you but where is a good place to host the pictures?

_________________
1973 Clubman GT - YG2S8 1637
Top
 Profile  
 
9YaTaH
PostPosted: Tue Sep 10, 2019 8:49 am 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
GuamMini wrote:
Thank you but where is a good place to host the pictures?


Upload direct from your computer :!:

_________________
"Show me the Mini!"
Top
 Profile  
 
sitnlo62
PostPosted: Tue Sep 10, 2019 9:45 am 
Offline
998cc
998cc
User avatar

Joined: Tue Apr 11, 2006 8:15 am
Posts: 722
Location: Brisbane
viewtopic.php?f=25&t=10405

_________________
Image
Top
 Profile  
 
winabbey
PostPosted: Tue Sep 10, 2019 10:56 am 
Online
1360cc
1360cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 6751
Location: Melbourne, VIC
This is a later set of instructions that I think are a bit easier to follow.

viewtopic.php?f=25&t=96873

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43
Top
 Profile  
 
GuamMini
PostPosted: Tue Sep 10, 2019 1:46 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 26, 2016 11:27 am
Posts: 365
Location: Mangilao, Guam
please see attached pictures


You do not have the required permissions to view the files attached to this post.

_________________
1973 Clubman GT - YG2S8 1637
Top
 Profile  
 
gtogreen1969
PostPosted: Tue Sep 10, 2019 1:48 pm 
Offline
1275cc
1275cc
User avatar

Joined: Fri May 02, 2008 3:07 pm
Posts: 5123
Location: The Internet
I think you have the wrong coil bracket. It needs to be a single bolt hole / offset bracket style.

Attachment:
Coil Bracket 2.jpg

Attachment:
Coil Bracket 1.jpg

Attachment:
Coil Bracket.jpg

Attachment:
1971 alternator.jpg


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
GuamMini
PostPosted: Tue Sep 10, 2019 4:13 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 26, 2016 11:27 am
Posts: 365
Location: Mangilao, Guam
Thank you gtogreen1969, would you know where I could buy that bracket?

_________________
1973 Clubman GT - YG2S8 1637
Top
 Profile  
 
gtogreen1969
PostPosted: Tue Sep 10, 2019 4:16 pm 
Offline
1275cc
1275cc
User avatar

Joined: Fri May 02, 2008 3:07 pm
Posts: 5123
Location: The Internet
GuamMini wrote:
Thank you gtogreen1969, would you know where I could buy that bracket?
I just googled images of coil brackets and there are quite a few. Try Mustang coil bracket. Are there any speed shops in Guam?
Top
 Profile  
 
GuamMini
PostPosted: Tue Sep 10, 2019 4:34 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 26, 2016 11:27 am
Posts: 365
Location: Mangilao, Guam
gtogreen1969 wrote:
GuamMini wrote:
Thank you gtogreen1969, would you know where I could buy that bracket?
I just googled images of coil brackets and there are quite a few. Try Mustang coil bracket. Are there any speed shops in Guam?



Sadly none, I would need to find one even a used one would be fine :roll: anybody have one lying around????

_________________
1973 Clubman GT - YG2S8 1637
Top
 Profile  
 
timmy201
PostPosted: Tue Sep 10, 2019 5:11 pm 
Online
1275cc
1275cc
User avatar

Joined: Sun Apr 29, 2012 1:19 pm
Posts: 4502
Location: Wollongong, NSW
You can also just bend the one you have and just use the single bolt hole.

_________________
Image
Top
 Profile  
 
Morris 1100
PostPosted: Tue Sep 10, 2019 5:24 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
Ford Econoline, Ford F150, etc.
Top
 Profile  
 
sitnlo62
PostPosted: Tue Sep 10, 2019 5:41 pm 
Offline
998cc
998cc
User avatar

Joined: Tue Apr 11, 2006 8:15 am
Posts: 722
Location: Brisbane
timmy201 wrote:
You can also just bend the one you have and just use the single bolt hole.


No you can't, it won't provide the required offset.

_________________
Image
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: Harley and 86 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.