Ausmini
It is currently Tue Jul 22, 2025 2:32 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Wed Jan 06, 2021 1:23 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
Attachment:
IMG_20210106_152659.jpg
These have been NLA for a while now.
14A7387 is part number. According to my pub1052 parts list. 2 per door.

I have just machined some alloy ones up, can do more if needed.

Edit:
Failure to fit this washer can result in distortion of the doorskin at the hinge.

Price TBA but won't be expensive.


You do not have the required permissions to view the files attached to this post.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Last edited by drmini in aust on Wed Jan 06, 2021 2:29 pm, edited 3 times in total.

Top
 Profile  
 
PostPosted: Wed Jan 06, 2021 1:41 pm 
Offline
1098cc
1098cc

Joined: Wed Sep 30, 2015 9:38 am
Posts: 1572
Location: Brandy Hill, NSW
Is that part number 14A7387??


Top
 Profile  
 
PostPosted: Wed Jan 06, 2021 2:06 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
My bad.
It's on the rear hinge stud, and the front of door bolt, called distance piece. 2 per door.
P/ no 14A7387.

Will change part number on original post.

Edit:
The special washer mentioned ( item 17, but not shown) in parts list is a large diameter thin flat washer, it bends to fit the door skin curve.
On rear stud only.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
PostPosted: Wed Jan 06, 2021 7:15 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat Apr 14, 2007 8:34 pm
Posts: 3415
Location: Cowra
Available from minispares.... Bought a bunch in my last order.

http://www.minispares.com/product/Class ... o%20search


Well done though Doc

_________________
Image


Top
 Profile  
 
PostPosted: Wed Jan 06, 2021 7:41 pm 
Offline
1098cc
1098cc

Joined: Wed Sep 30, 2015 9:38 am
Posts: 1572
Location: Brandy Hill, NSW
Minispares, look like they where made with a hacksaw.


Top
 Profile  
 
PostPosted: Wed Jan 06, 2021 7:52 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
Thanks guys.
I looked here in Oz a while back, I think John Smidt had some but nobody else.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
PostPosted: Thu Feb 25, 2021 8:44 am 
Offline
1098cc
1098cc

Joined: Wed Sep 30, 2015 9:38 am
Posts: 1572
Location: Brandy Hill, NSW
There are NLA descibed as "Washer-special-rear servo top hinge" washers used on the door hinges, not sure where they fit or the dimensions, any help would be appreciated as I need some for my resto.


Top
 Profile  
 
PostPosted: Thu Feb 25, 2021 9:16 am 
Offline
1360cc
1360cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 6750
Location: Melbourne, VIC
https://minisport.com.au/mini-mk1-mk2-e ... led-spacer

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43


Top
 Profile  
 
PostPosted: Thu Feb 25, 2021 9:34 am 
Offline
848cc
848cc

Joined: Thu Sep 04, 2014 2:20 pm
Posts: 100
Location: Brisbane
Agree with Cooperess. The photo of the ones on Minisport.com.au site look they were cut with a hacksaw by someone in a hurry!

_________________
1965 MK1 English Morris Cooper S (Downton)
1967 MK1 Morris Cooper S
1972 Clubman GT (6/72 Cadiz)
1968 MG Midget


Top
 Profile  
 
PostPosted: Thu Feb 25, 2021 1:57 pm 
Offline
998cc
998cc

Joined: Mon Jan 12, 2015 10:59 pm
Posts: 985
Location: Holt ACT
drmini in aust wrote:
My bad.
It's on the rear hinge stud, and the front of door bolt, called distance piece. 2 per door.
P/ no 14A7387.

Will change part number on original post.

Edit:
The special washer mentioned ( item 17, but not shown) in parts list is a large diameter thin flat washer, it bends to fit the door skin curve.
On rear stud only.


Yes, 2 per door on the upper hinge and two per hinge mounting panel (the short part of the hinge) for these hinges as well.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 80 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.