i ordered my rc40 tday can twait till it comes tommorow hopfully

It was a real ausmini convention at Karcraft this arvo. I knew JAM would have been and gone, but while I was there one of our chaps wanders in (the guy with the mini that was at Summernats - sorry, I know I met you at kazjim's garage sale but I can't remember your name), then a few miniutes later, Aaron strolls in.

Had a good yarn with Greg, must have been there over an hour. Excellent service as always.

yep....Rob sorted me out....and $500 later I have just about EVERYTHING to finish JAM!!!

I phoned Heritage as well......got prices.....dearer here, cheaper there.....but gee Karcraft have good service!

the exhaust is being couriered to me for $15 what service

they are great!!!!

hope it sounds good and is alittle quieter than mine now

measured it the othe day 108db at 3000rpm

what you putting it on? 998cc or did you say yours is 1100?

I was in the middle of pulling my sub frame down when i couln't find my spring compressor.... ahh well if i ever find it i will have 2! But you can't just go to Karcraft and buy 1 thing, so i bought hilos for the van. May as well throw em in while the subframes out.
1310/71 seemed to be buying up big. Fortunatly i had done that about 3 months ago.

Cheers

Aaron

_________________

Talking about good service and the place at Smithfield - dont ever try to return one of their LCBs even if it doesnt allign with the A series head. I never seen so much concentrated indignation radiating from one person - no point telling them that me, Kev and gafmo spent a good few hours trying to make it line up - all I got back was "we sold thousands of these and youre the first one complaining". I say "but they just dont line up just try them against a head" and the guy's like "I dont have to check them theyre fine youre the only one complaining".

will deal with Karcraft next time.

I got two LCBs from heritage and they fit alright
did you bring a head in to show them it didnt line up right?
and who did you speak to?

theyre great people there at Heritage

_________________
Inconspicuously Conspicuous
Appreciation without Depreciation
forever chasing clearer skies...

My bill yesterday came to $700 comprising mainly of
Gaskets sets
exhaust valves, 2 inlet valves, valve guides, valve spring set
Oil Cooler and hose set, Oil filters
Cam followers
iwis double row chain
engine mounts and a few misc bits and pieces.

I had already spent $300 at repco on bearings, and ARP rod bolts and nuts.

Expect the total to be between $1500 and $2000 by the time its finished.

KB

1144 to be exact with twin su too

she shall sound sweet!! 1144cc aye, better than vivs 1060cc