ausmini • View topic - Delorto parts?

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Delorto parts?

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 2

[ 19 posts ]

Go to page 1, 2 Next

Print view

Previous topic | Next topic

Author

Message

clubmn

Post subject: Delorto parts?

Posted: Mon Sep 05, 2005 6:10 pm

1098cc

Joined: Tue Mar 23, 2004 10:07 pm
Posts: 1504
Location: melbourne australia

Where can i get some Delorto parts?
Im trying to tune an engne, Does anyone have some jets etc. that they may want to hire.
Or know of a place that stock Parts.
Also i need 4 Idle screws suit Delorto...Email
[email protected] If you can help

_________________

*Reasonable pricing
*I come to you..
Jay: 0431404607

Top

gafmo

Post subject:

Posted: Mon Sep 05, 2005 7:14 pm

the King of Bling

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills

This is the Contact I have and will be doing the same Shortley :wink:

_________________
Stop Licking the Dog...I Don't Care Who Started It

Top

drmini in aust

Post subject:

Posted: Mon Sep 05, 2005 7:20 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW

Carburettor Service Co, 240 Parramatta Rd Burwood (Sydney) carry jets and repair kits.
Or, try this guy-

Otherwise, bring in bits from Eurocarb, at www.dellorto.co.uk like I do. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

feralsprint

Post subject:

Posted: Mon Sep 05, 2005 7:22 pm

1275cc

Joined: Mon Jan 24, 2005 4:02 pm
Posts: 3477
Location: Queanbeyan

try this link, they have been good in the past and it only takes about 4-5 days for the bits you need to arrive, i had lots of problems getting the right emulsion tubes and jets in oz and finally had to resort to these guys

[email protected]

its there email addy and if you know what you want thaey are good

_________________
Roundies and Clubbies(except vans) are both ugly that is why I have Midas and a van
1293 Mini Midas Bronze,1275 Clubman van

Top

drmini in aust

Post subject:

Posted: Mon Sep 05, 2005 7:44 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW

They will send you a parts list with prices. I use them too, as I said above.
But they may try to steer you to their local distributor here... :roll:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

feralsprint

Post subject:

Posted: Mon Sep 05, 2005 7:57 pm

1275cc

Joined: Mon Jan 24, 2005 4:02 pm
Posts: 3477
Location: Queanbeyan

Doc

yeah last time I posted on here when someone was looking for emulsion tubes in canberra I ended up getting an email from a guy in the US looking for tubes 7774.5 and he wanted 6, thanks for putting up that link to the Australian dealer i really couldn't find anyone a couple of years ago with a good range of bits in oz

_________________
Roundies and Clubbies(except vans) are both ugly that is why I have Midas and a van
1293 Mini Midas Bronze,1275 Clubman van

Top

drmini in aust

Post subject:

Posted: Mon Sep 05, 2005 8:02 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW

Just so you know, 7772.5 emulsion tubes are NLA now I think- but 7772.6 work OK for me, in 1098s and 1275s. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

feralsprint

Post subject:

Posted: Mon Sep 05, 2005 8:09 pm

1275cc

Joined: Mon Jan 24, 2005 4:02 pm
Posts: 3477
Location: Queanbeyan

Doc I got 4 if ya ever need em, they weren't right for the dolomite when I put the twins on it have gone the next size up and will probably end up going up again and after that there ain't no where to go :roll:

_________________
Roundies and Clubbies(except vans) are both ugly that is why I have Midas and a van
1293 Mini Midas Bronze,1275 Clubman van

Top

clubmn

Post subject: thanks

Posted: Mon Sep 05, 2005 8:24 pm

1098cc

Joined: Tue Mar 23, 2004 10:07 pm
Posts: 1504
Location: melbourne australia

Thanks for the help guys, Im trying to tune my 1500 cortina/bugeye But i know not a thing about Dell'Ortos carbies. The numbers provided should help me out.
If anyone has any sudgestions for combinations for a starting point, I would be very intrested to hear.

_________________

*Reasonable pricing
*I come to you..
Jay: 0431404607

Top

drmini in aust

Post subject: Re: thanks

Posted: Mon Sep 05, 2005 9:23 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW

clubmn wrote:

What size carb(s), single or twins?

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

gafmo

Post subject:

Posted: Mon Sep 05, 2005 9:50 pm

the King of Bling

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills

Good I'm a dope sometimes...Ekk
Yer mine was the Uk Deelorto site also http://www.dellorto.co.uk/...
some body give me a thick head please

_________________
Stop Licking the Dog...I Don't Care Who Started It

Top

CPOCSM

Post subject:

Posted: Mon Sep 05, 2005 10:16 pm

1275cc

Joined: Fri Aug 13, 2004 3:45 am
Posts: 2360
Location: SE QLD

I have about 20 of each (emulsion tubes .5, .6, .7, idle jets, mains, pump jets and air correctors). Cost me around $120 and all new. Near on bought them out. Mob in italy still selling the stuff - waiting on some 30mm chokes - just to see what happens when I put them in Henry

Hooroo

Rob Forsyth
Miniot!!

_________________
Rob Forsyth
Miniot!!

Top

gafmo

Post subject:

Posted: Mon Sep 05, 2005 10:20 pm

the King of Bling

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills

By chance do you have any butterflies for a 40 and a 48 including shaftes and bearings...Ant of the above I will purchase :wink:

_________________
Stop Licking the Dog...I Don't Care Who Started It

Top

clubmn

Post subject: Delorto

Posted: Mon Sep 05, 2005 10:32 pm

1098cc

Joined: Tue Mar 23, 2004 10:07 pm
Posts: 1504
Location: melbourne australia

twin 40's (2) .

_________________

*Reasonable pricing
*I come to you..
Jay: 0431404607

Top

CPOCSM

Post subject:

Posted: Mon Sep 05, 2005 10:35 pm

1275cc

Joined: Fri Aug 13, 2004 3:45 am
Posts: 2360
Location: SE QLD

gafmo wrote:

By chance do you have any butterflies for a 40 and a 48 including shaftes and bearings...Ant of the above I will purchase :wink:

No shafts or bearings - wait until i get the stuff in and I will see what I have - I am not really interested in cash - more to help those in need...lol

I think they cost me all of $2.50 a piece...chicken feed...

Will let you know when the stuff gets in

Hooroo

Rob Forsyth
Miniot!!

_________________
Rob Forsyth
Miniot!!

Top

Page 1 of 2

[ 19 posts ]

Go to page 1, 2 Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 99 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: