when is your birthday?
Mine is tomorrow.
I am a 35 year old trapped in the body of a 27 year old. Weird huh

DAVID

Bugger off you young twirps..

I am a 58 yo trapped in a 58 yo body..

What he said, ^^^
61/61 here. But still kickin'.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

but kev

61/61=1 Think of it this way and your really only very young.

_________________
Ryan Filippi
Minis In The Gong
[email protected]
www.minisinthegong.com.au

Hahahaha Kev you old basterd.. lol

_________________
If it cant be fixed with a hammer it cant be FIXED!!

You got problems. I have the mind of a seven year old trapped in the body of 41yo.

biam..
7 year old is a bit generous for you.

You young blokes may make fun of us older gentlemen but just remember, we have made it to our older ages, you haven't...

is that just a statement jack or should i take that as a threat? Im gonna tell my mum, threats from morwell are always taken seriously...

David

That David my boy is called a threatening statement... Or should it be a statement of threats????

As mentioned in another topic, I bought a 100 amp Gasless MIG for $285ish. Got good penetration on 2mm steel, but was a bit of a slow process....

Mine is made by SIP.... and has 2 adjustment locations:

- There is a 2 way switch on the front that controls the amps (HI and LOW). Aparrently 'LOW' is for 0.6 to 1.3mm steel, and HI is for anything thicker.

- To adjust the feed rate, there is a knob under the top cover which adjusts the pressure between two rollers on the wire. The only bad thing is that the wire is always live when the machine is on.... so you need to switch it off before adjusting the pressure. I'm going to modify/extend this knob so that it is external and non conductive for easier adjustment.

Other than that, it is fine for the jobs I do. I'm not welding bridges after all....

_________________
[NATHAN] -- Sold everything mini related and am back in big beautiful BMWs

happy brthday to me.
Stopped at a stop sign today and someone drove up my ass and dented both of my vans rear doors. He was a courier and didnt say sorry. He said he was reading his computer as he just got a job to deliver. He said it as if it was a valid reason to run up my ass. He then said that I should take 100 cash walk away. I then informed him that that would not be happening as one of the doors let alone both was worth more than that.

GAHHH

DAVID

oh god david, what a crappy birthday. I hope apart from that incident the day was good?

_________________
Introducing 'LITE'. The new way to spell 'light' with 20% less letters!

I don't know my name anymore.

was alright. the damge is minor. It is just alot of hassle is all.

Hey floss, when we say go get smashed on your birthday we don't mean it like that...

But Happy Birthday Day all the same...