Ausmini
It is currently Wed Jul 16, 2025 4:04 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 2 of 3
  [ 32 posts ]  Go to page Previous  1, 2, 3  Next
  Print view Previous topic | Next topic 
Author Message
drmini in aust
 Post subject:
PostPosted: Fri Dec 10, 2004 7:23 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Duc,
The speedo cable is a stock one- but there's just enough room to reach around the binnacle and undo the cable end, before pulling the binnacle back.
It's also got an early Clubbie plate screwed into the firewall hole, helps shut the noise up.. 8) Pretty neat setup.

The spare speedos I have are not Moke ones. You need to get one that suits the Moke's diff ratio and wheels. Check the numbers on front of the speedo face- the 4 digits at the RH end are `turns per mile'. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
gafmo
 Post subject:
PostPosted: Fri Dec 10, 2004 8:08 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
I can come over tomorrow and play....Sue mum and dads Party is next weekend....... :lol:

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
mrcooms
 Post subject:
PostPosted: Fri Dec 10, 2004 8:17 pm 
Offline
998cc
998cc

Joined: Fri May 07, 2004 8:25 pm
Posts: 597
Location: Sydney
anton wat time is the fitting of the head lining occuring and when is everyone turning up
Top
 Profile  
 
ozmotorsport
 Post subject:
PostPosted: Fri Dec 10, 2004 8:28 pm 
Offline
998cc
998cc
User avatar

Joined: Tue Oct 05, 2004 5:05 pm
Posts: 1011
Location: South Coast
Man it sux living in Wollongong
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Dec 10, 2004 9:12 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
gafmo wrote:
I can come over tomorrow and play....Sue mum and dads Party is next weekend....... :lol:

Bring Morris for a run... after you tighten the head. Needs a run afterwards doesn't it... nudge nudge, :wink: :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Chris
 Post subject:
PostPosted: Fri Dec 10, 2004 10:48 pm 
Offline
1098cc
1098cc

Joined: Mon Nov 01, 2004 10:19 pm
Posts: 1203
Location: Helensburgh NSW
ozmotorsport wrote:
I'm putting the new diff in tomorrow, I've got the head off so I'll so stare at that for a while. If all goes sweet might do a couple of the smaller jobs.


Didn't have the head off when I last saw it.

_________________
Chris

Everything I like is either
illegal, immoral or fattening.
Top
 Profile  
 
ozmotorsport
 Post subject:
PostPosted: Sat Dec 11, 2004 7:22 am 
Offline
998cc
998cc
User avatar

Joined: Tue Oct 05, 2004 5:05 pm
Posts: 1011
Location: South Coast
It came of Yesreday (Friday) arvo. Will post some pix of proogress this afternoon in BARM thread
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Sat Dec 11, 2004 8:05 am 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
Guys....was out last night....

I am starting NOW..... :lol:

Will be at it all day.....the Mrs and Jr are out till 2.

Duc, give me a call. Michael, Jim,Kev etc..... you know where I am.

Cheers guys.
Top
 Profile  
 
gafmo
 Post subject:
PostPosted: Sat Dec 11, 2004 8:08 am 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Not sure what time I'll be over as I want to toget a coat on the Subby so I have to clean and Metal ready it first and hopfully a coat of POR possible this arvo

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
13secmini
 Post subject:
PostPosted: Sat Dec 11, 2004 1:44 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Mar 21, 2004 10:28 am
Posts: 2452
Location: Wollongong
we came, we saw, we talked some mini crap :D

Oh and we got the PIMP hood lining installed. Looks great, noit long till JAM hits the streets.

_________________
1974 Moke - 998cc
76 Clubman B16a2 Vtec AWD Turbo 12.9@105mph
https://www.youtube.com/watch?v=V9PW49e1hYs
Top
 Profile  
 
68matic
 Post subject:
PostPosted: Sat Dec 11, 2004 5:14 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 9:12 pm
Posts: 5038
Location: cabramatta sydney
how much water can a moke hold?

i found out this arvo after driving home on the old windsor
goggles = fog
no goggles = like darts thrown at your eyes...

_________________
Inconspicuously Conspicuous
Appreciation without Depreciation
forever chasing clearer skies...
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Sat Dec 11, 2004 8:28 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
Yea Brad...there is nothing like a day of Mini work and Mini chat!.....If I had beers I would have got them happening. It was hot enough!!

The lining looks MAD!! No dramas getting it in at all. Thanks everyone for the help and for the audience... :lol: I get less done with an audience, but it makes it so much more interesting!

Duc, after you and Michael left I had a chin wag with the people accross the street and we watched that storm front move accross from the direction you headed off into......... :shock: That was HUGE!!...and we were talking about driving in the rain just before.... :lol:
Top
 Profile  
 
mrcooms
 Post subject:
PostPosted: Sat Dec 11, 2004 9:51 pm 
Offline
998cc
998cc

Joined: Fri May 07, 2004 8:25 pm
Posts: 597
Location: Sydney
I was thinking off u when i got home Duc is saw it pelt down and i was picturing u driving home :? :?
Top
 Profile  
 
gafmo
 Post subject:
PostPosted: Sun Dec 12, 2004 6:29 am 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Sorry I was not able to make it Anton.. :oops: but I had to get a coat on the Subby. I did do this and have found water in the belly of the compressor...quit a bit really..Still I got those little dots again. I'll put another coat on today. I had the Subby sitting outside drying upuntill the rain came down nice and hard..I feel you Duc.
Additionally I ripped all the front assembly apart except the ball joints which I need a big vice for, It'll be done today.

No Picks of the gathering :?:

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
Chris
 Post subject:
PostPosted: Sun Dec 12, 2004 10:12 am 
Offline
1098cc
1098cc

Joined: Mon Nov 01, 2004 10:19 pm
Posts: 1203
Location: Helensburgh NSW
68matic wrote:
how much water can a moke hold?

i found out this arvo after driving home on the old windsor
goggles = fog
no goggles = like darts thrown at your eyes...


I worked at JRA at Liverpool where all the vehicles were stored in the early 80's and we had a lot of Mokes in the yard that needed moving. It rained the night before and when we fronted up to do it every seat had water in it. It was not pleasant. I do recall there were somewhere round about 150 mokes and a lot of very wet people.

_________________
Chris

Everything I like is either
illegal, immoral or fattening.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 3
  [ 32 posts ]  Go to page Previous  1, 2, 3  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 85 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.