You can if you want PM me. i have a mini mechanic mate who is quitting his lease and needs to off-load some pallet racks. Chipping Norton (Sydney) - maybe too far from where you are located though... depends on your transport connexions i suppose...

_________________
..still waiting for the Italian Job sequel to see if the bus went down

id be keen...

_________________
Here am I sitting in my tin can far above the Moon
Planet Earth is blue and there's nothing I can do...



“A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.” - Jeremy Clarkson

Made my own from 20mm x 20mm x 2mm steel angle. Cheap to buy, plus a couple of hours in the shed. Mine goes from floor to roof and is about 3m long and about 400mm wide. Then plastic storage boxes on the shelves. Shelves were 16mm melamine faced chipboard from the local salvage yard all new stuff. I recon it cost about $60 to 80 all up off memory. I'll be doing some more soon as they work a treat and strong as.

_________________
TOO MANY MINIS AND NOT ENOUGH TIME