Timbo wrote:
Don't forget the intermediate spacer ones fitted to early to mid 70's mokes. They have about 1/2" of spacer.
Tim
I got 1 of those once for a Mini by mistake, it was 19mm (3/4") of spacer.
But hey, you can put any of these spacer ones in a lathe and reduce width to what you want.
I used to machine the spacer part off dead S ones and use for `spacers' on Honda Civic discs. The stud and attachment screw holes are already drilled.....
_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.
