ausmini https://www.ausmini.com/forums/ |
|
Identify a Gear https://www.ausmini.com/forums/viewtopic.php?f=2&t=100295 |
Page 1 of 1 |
Author: | Bill B [ Sat Aug 15, 2020 3:44 pm ] |
Post subject: | Identify a Gear |
Have been sifting through some parts boxes. Can anyone identify this input shaft? It is new or only slightly used; the same length as other 3-synchro inputs - longer than 4 synchro; 20 teeth B form; 'G' stamped into mainshaft end. |
Author: | OGW1152 [ Sat Aug 15, 2020 6:56 pm ] |
Post subject: | Re: Identify a Gear |
Hello Bill, I'd say MK 1 3 synchro Cooper s to mate to Lay Gear 22g232 or 22g 1100 Part # 22a982 Regards, Glen |
Author: | Bill B [ Tue Aug 18, 2020 9:45 am ] |
Post subject: | Re: Identify a Gear |
Thanks for the reply Glen. I was hoping that was it, but there is more than 1 input gear with 20 teeth. Got similar confirmation from a UK website - the "G" stamping an extra clue to narrow it down. Now to coat it and label it for future use. |
Author: | OGW1152 [ Tue Aug 18, 2020 10:26 am ] |
Post subject: | Re: Identify a Gear |
Hello Bill, Glad your sorted. A good part to stash away for a spare. Regards, Glen |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |