| ausmini https://www.ausmini.com/forums/ |
|
| Primary Gear Spacer https://www.ausmini.com/forums/viewtopic.php?f=2&t=100334 |
Page 1 of 1 |
| Author: | cooperess [ Thu Aug 27, 2020 9:21 am ] |
| Post subject: | Primary Gear Spacer |
Where can I gear a good replacement for this part. Attachment: Primary Gear Spacer.JPG
|
|
| Author: | Morbo28 [ Thu Aug 27, 2020 11:02 am ] |
| Post subject: | Re: Primary Gear Spacer |
I bought mine from here https://classicmotoring.net.au/search.p ... +gear+shim Obviously you need to measure clearances to figure out which one you need. |
|
| Author: | cooperess [ Thu Aug 27, 2020 11:11 am ] |
| Post subject: | Re: Primary Gear Spacer |
'Morbo28" Not that shim. It goes on where the oil holes are, where the oil seal runs. |
|
| Author: | Morbo28 [ Thu Aug 27, 2020 11:13 am ] |
| Post subject: | Re: Primary Gear Spacer |
cooperess wrote: 'Morbo28" Not that shim. It goes on where the oil holes are, where the oil seal runs. Ah! |
|
| Author: | drmini in aust [ Thu Aug 27, 2020 11:17 am ] |
| Post subject: | Re: Primary Gear Spacer |
More than half the primary gears I've seen out there are missing that oil slinger. These days with decent seals they work fine without it. Edit The black Rover MPI seal allegedly seals better according to one Mini repairer (not GR) I know. I've not had one leak either. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|