ausmini https://www.ausmini.com/forums/ |
|
Mk1 Temperature Gauge https://www.ausmini.com/forums/viewtopic.php?f=2&t=101758 |
Page 1 of 1 |
Author: | Bill B [ Sat Mar 18, 2023 4:12 pm ] |
Post subject: | Mk1 Temperature Gauge |
Does anyone know what style of temperature gauge was used on early Australian Mk1 Ss? The gauge that came with the car was this one. Attachment: Temp Gauge Face BT2204 - 04.jpg Unfortunately it was water damaged during a previous rebuild and I replaced it by the one in the photo below. Attachment: Temp Gauge Face TC4303 -07.jpg
|
Author: | winabbey [ Sat Mar 18, 2023 4:49 pm ] |
Post subject: | Re: Mk1 Temperature Gauge |
Can't give you a pic but, according to the parts book, the Mark 1 Australian S's used BMC part 13H2137, which is Smiths part BT2204/04. It's black faced and made in the UK. The later gauges used on the MK II Series Minis were grey faced and Australian made. UPDATE: Bill - I see the file name on your first photo has the Smiths part number I showed above, so that's what was originally in the car. |
Author: | gtogreen1969 [ Sat Mar 18, 2023 5:07 pm ] |
Post subject: | Re: Mk1 Temperature Gauge |
I thought they looked more like this Attachment: MK1 Cooper S Temp Gauge..jpg Here are a few from cars that look unrestored or pretty original. Sorry about the pic quality Attachment: YKG2S2 1506 MK1 S Temp Gauge.jpg Attachment: YKG2S2 1878 MK1 S Temp Gauge.jpg Attachment: YKG2S2 2421 MK1 S Temp Gauge.jpg Attachment: YKG2S2 3400 MK1 S Temp Gauge.jpg Attachment: YKG2S2 4356 MK1 S Temp Gauge.jpg Attachment: YKG2S2 5076 MK1 S Temp Gauge.jpg
|
Author: | Bill B [ Sat Mar 18, 2023 6:13 pm ] |
Post subject: | Re: Mk1 Temperature Gauge |
Thanks for the replies. Personally, I thought, like gtogreen, that there were red and blue coloured 'flags' on the scale. But the gauge I have with the coloured 'flags' is not exactly the same as the photo examples. I'm wondering if there was an early gauge used first (BT2204/04 without coloured flags, as winabbey refers to) then replaced by one with flags? I realise it's not an important issue, especially as I just want a temperature gauge that works. Be nice if close to original. Out of interest, the Smiths model number is printed under the front plate. Attachment: ktrb8mtn.png
|
Author: | ausdino [ Sun Mar 19, 2023 5:06 pm ] |
Post subject: | Re: Mk1 Temperature Gauge |
Bill, you are more than welcome to these face plates, if they are of any use. Came from a non-functioning mk1 gauge with broken glass. No use to me. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |