| ausmini https://www.ausmini.com/forums/ |
|
| camshaft questions https://www.ausmini.com/forums/viewtopic.php?f=2&t=10180 |
Page 1 of 1 |
| Author: | Flying Brick [ Tue Aug 16, 2005 10:01 am ] |
| Post subject: | camshaft questions |
Gday everyone, I have 2 camshafts, both out of 1275's(apparently).I can't find any numbers on them to identify them. One of them has a lobe for the fuel pump and the other has no lobe which would be ok if it was put in an engine with a electric pump. Is this normal for some not to have the lobe? I havn't seen this before. Both have different oil pump drives too. Thanks. Steve. |
|
| Author: | feralsprint [ Tue Aug 16, 2005 10:17 am ] |
| Post subject: | |
The one without the lobe is probably a Cooper S cam and from my fading memory they also used a series or rings around the cam to identify what cam it is, the other cam is probably an 1100S cam shaft, the other give away is the width of the lobes Jon |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|