ausmini https://www.ausmini.com/forums/ |
|
Storage solution for separated engines/transmissions https://www.ausmini.com/forums/viewtopic.php?f=2&t=101880 |
Page 1 of 1 |
Author: | 68+86auto [ Sun Jun 04, 2023 8:32 pm ] |
Post subject: | Storage solution for separated engines/transmissions |
How is everyone storing/sealing their engines and gearboxes when they are separated. Last time I wrapped them in pallet wrap and had them on a trolley but it wasn't the best. It wasn't sealed particularly well and the plastic could easily get torn. I am thinking of getting a large plastic container for each of them but they are too large for most containers and I don't want rubbish ones which will fall apart. |
Author: | stewartp [ Sun Jun 04, 2023 10:00 pm ] |
Post subject: | Re: Storage solution for separated engines/transmissions |
68+86auto wrote: How is everyone storing/sealing their engines and gearboxes when they are separated. Last time I wrapped them in pallet wrap and had them on a trolley but it wasn't the best. It wasn't sealed particularly well and the plastic could easily get torn. I am thinking of getting a large plastic container for each of them but they are too large for most containers and I don't want rubbish ones which will fall apart. I have a gearbox in one of those big black plastic containers with a yellow lid. I stored an engine/gearbox for nearly thirty years wrapped in plastic, no head on it. I just smeared grease on the head surface and regularly oiled the Bores and turned it over .now in the car working. The tools I made as an apprentice are rust free smeared in the grease I put on in 1964. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |