ausmini
https://www.ausmini.com/forums/

1275 LS Engine Colour
https://www.ausmini.com/forums/viewtopic.php?f=2&t=101973
Page 1 of 2

Author:  fffffred [ Thu Aug 10, 2023 5:21 pm ]
Post subject:  1275 LS Engine Colour

Looking to refresh my engine bay and would like to paint my engine block. Anybody know what the factory colour was?

According to my quick research - black appears to be the colour...

https://www.mokeforum.com.au/index.php?topic=6697.15

Author:  gtogreen1969 [ Thu Aug 10, 2023 7:28 pm ]
Post subject:  Re: 1275 LS Engine Colour

fffffred wrote:
Looking to refresh my engine bay and would like to paint my engine block. Anybody know what the factory colour was?

According to my quick research - black appears to be the colour...

https://www.mokeforum.com.au/index.php?topic=6697.15


Yes the engine was black

Attachment:
XNFAD18Y 105303 engine bay 12H902UH 000843.jpg


Attachment:
1275LS engine bay - period photo.jpg

Author:  eightfifty [ Thu Aug 10, 2023 8:51 pm ]
Post subject:  Re: 1275 LS Engine Colour

There is a little bit of a story here. This engine was fully imported from UK and made to Swedish specification, that configuration being the one most suitable for our ADR emissions regulations. Upon delivery to Australia, the engine was black, including the rocker cover. During preparation, the rocker cover was removed because the oil hose pipe at the top had to be swung around to face the direction shown in Brad's photos above. While it was off, the rocker cover was put through the paint shop and painted silver to set the engine apart with an extra touch compared to the base model YDO21 models, those remaining black.

Author:  jaybee [ Fri Aug 11, 2023 9:10 am ]
Post subject:  Re: 1275 LS Engine Colour

eightfifty wrote:
There is a little bit of a story here. This engine was fully imported from UK and made to Swedish specification, that configuration being the one most suitable for our ADR emissions regulations. Upon delivery to Australia, the engine was black, including the rocker cover. During preparation, the rocker cover was removed because the oil hose pipe at the top had to be swung around to face the direction shown in Brad's photos above. While it was off, the rocker cover was put through the paint shop and painted silver to set the engine apart with an extra touch compared to the base model YDO21 models, those remaining black.

How was it swung around? Is it welded on, or just held by a nut underneath?

Author:  eightfifty [ Fri Aug 11, 2023 10:14 am ]
Post subject:  Re: 1275 LS Engine Colour

The pipe is brazed. Just going on the parts book part numbers, the reworked rocker cover with pipe and silver colour applied only to LS1275. By that time, sales of 998cc were probably minimal, but apparently the 998 rocker covers were not painted or altered although there is a part CAM453 for 998cc for which I don't have a drawing. The picture below shows the 1275 rocker cover where you can see that they just traced the old part and whited out the old oil pipe and drew it in the new position. Elsewhere on the drawing also specifies silver finish to the exterior surface as part of the rework.

Author:  fffffred [ Sat Aug 12, 2023 1:15 am ]
Post subject:  Re: 1275 LS Engine Colour

Thanks - explains the peeling black paint on my engine... Including the clutch cover.

Author:  ken@miniauto [ Fri Sep 08, 2023 4:32 pm ]
Post subject:  Re: 1275 LS Engine Colour

Hi
Does anyone have similar underbonnet picture for 998 LS
TIA

Author:  Steam [ Fri Sep 08, 2023 5:09 pm ]
Post subject:  Re: 1275 LS Engine Colour

ken@miniauto wrote:
Hi
Does anyone have similar underbonnet picture for 998 LS
TIA

Dr Google is you friend here, e ter Mini 998 ls. I am hesitant to link but facebook, pinterest etc all have pics

Author:  Steam [ Fri Sep 08, 2023 5:17 pm ]
Post subject:  Re: 1275 LS Engine Colour

eightfifty wrote:
The pipe is brazed. Just going on the parts book part numbers, the reworked rocker cover with pipe and silver colour applied only to LS1275. By that time, sales of 998cc were probably minimal, but apparently the 998 rocker covers were not painted or altered although there is a part CAM453 for 998cc for which I don't have a drawing. The picture below shows the 1275 rocker cover where you can see that they just traced the old part and whited out the old oil pipe and drew it in the new position. Elsewhere on the drawing also specifies silver finish to the exterior surface as part of the rework.


Tony has more knowledge than I do on this but I thought the 998 rocker covers were painted while the pipe was left as it was.

Author:  gtogreen1969 [ Fri Sep 08, 2023 10:50 pm ]
Post subject:  Re: 1275 LS Engine Colour

ken@miniauto wrote:
Hi
Does anyone have similar underbonnet picture for 998 LS
TIA


This is a Mini S which is very similar to the 998LS engine bay.
Attachment:
1977 99H834AJH engine bay with EPAI air pump.jpg


The main difference is the second relay next to the washer bottle.
Attachment:
998LS engine bay, 2 relays.jpg

Attachment:
998LS engine bay.jpg

Author:  cooperess [ Fri Sep 08, 2023 11:00 pm ]
Post subject:  Re: 1275 LS Engine Colour

Where have all the air pumps gone?

Author:  eightfifty [ Sat Sep 09, 2023 6:36 am ]
Post subject:  Re: 1275 LS Engine Colour

I've looked into this a little more and can provide more information.

998cc YDO21 Rocker cover black as received from UK. Vent pointing toward carburetter.

998cc YDO22 S, SS, and LS. Rocker cover CAM4543 is specified as black, with the vent angled towards the carburetter as before, but Ron Moss tells me that he organised the covers to be painted silver - but this did not generate a new drawing. They just did it off their own bat at Enfield. This rocker cover has a long neck oil cap.

1275cc YDO22 LS. Rocker cover 12A1530 specified as black with vcnt angled towards the carburetter as received from UK, but painted silver and vent repositioned in Australia to point toward radiator. A new drawing was prepared for this rework. THis rocker cover has a short neck oil cap.

Note, the original vent pipe pointing toward carburetter is soldered on. The 1275LS rework has the repositioned vent pipe brazed in position.

A bit more complicated than my original reply.
regards
Tony

Author:  drmini in aust [ Sat Sep 09, 2023 12:16 pm ]
Post subject:  Re: 1275 LS Engine Colour

cooperess wrote:
Where have all the air pumps gone?

They were a waste of at least 5 hp, can't buy new, they've gone in the bin with all the other exhaust dilution rubbish. Good riddance. :lol:

I think ADR27A became obsolete since ulp fuel came in.

Author:  eightfifty [ Sat Sep 09, 2023 3:58 pm ]
Post subject:  Re: 1275 LS Engine Colour

ADR27A was replaced by ADR27B, and then AD27C and again by ADR37....Thanks to the introduction of catalytic converters and more modern closed loop emission control systems, we don't have to worry so much about the tacked on devices so despised of those years.

Author:  ken@miniauto [ Mon Sep 25, 2023 12:56 pm ]
Post subject:  Re: 1275 LS Engine Colour

Did 1978 998LS have a White or Yellow plastic fan
TIA

Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/