| ausmini https://www.ausmini.com/forums/ |
|
| MK2 WIRING MADE EASY https://www.ausmini.com/forums/viewtopic.php?f=2&t=102393 |
Page 1 of 1 |
| Author: | cooperess [ Sat Aug 31, 2024 11:51 am ] |
| Post subject: | MK2 WIRING MADE EASY |
Attachment: Mk2 Wiring Harness.jpg I think I got this picture from this site and few years ago. I would like to make this for my Mk2. It would make things easier. Just disconnect the loom and everything is made easier. What parts are required to make this type of harness in the wiring.
|
|
| Author: | andrew9 [ Sat Aug 31, 2024 12:34 pm ] |
| Post subject: | Re: MK2 WIRING MADE EASY |
Looks like one of these https://automotivesuperstore.com.au/deu ... z6JN4NckuY Crimper https://automotivesuperstore.com.au/raceworks-rwt-004 and get one of these in case you need to remove or move the pins around https://automotivesuperstore.com.au/raceworks-rwt-030 |
|
| Author: | timmy201 [ Sat Aug 31, 2024 1:02 pm ] |
| Post subject: | Re: MK2 WIRING MADE EASY |
That was made by Morbo, he did a number of similar sublooms like that using Deutsch type connectors viewtopic.php?f=3&t=86822&start=885 |
|
| Author: | cooperess [ Sat Aug 31, 2024 2:14 pm ] |
| Post subject: | Re: MK2 WIRING MADE EASY |
andrew9 & timmy201 Brilliant. Thank you guys. |
|
| Author: | 68+86auto [ Sun Sep 01, 2024 11:31 am ] |
| Post subject: | Re: MK2 WIRING MADE EASY |
Using Packard 56 series type connectors is another option. The Packard connectors allow for the mixing of terminal sizes but lacks weather sealing. |
|
| Author: | 68+86auto [ Tue Sep 03, 2024 3:15 pm ] |
| Post subject: | Re: MK2 WIRING MADE EASY |
andrew9 wrote: Looks like one of these https://automotivesuperstore.com.au/deu ... z6JN4NckuY Crimper https://automotivesuperstore.com.au/raceworks-rwt-004 and get one of these in case you need to remove or move the pins around https://automotivesuperstore.com.au/raceworks-rwt-030 The connector linked to is the DT series. The DTM series would be more appropriate. Attachment: Screenshot 2024-09-03 151430.png
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|