| ausmini https://www.ausmini.com/forums/ |
|
| GT Wheel Nuts https://www.ausmini.com/forums/viewtopic.php?f=2&t=102447 |
Page 1 of 1 |
| Author: | Firefirey [ Sat Dec 07, 2024 1:11 pm ] |
| Post subject: | GT Wheel Nuts |
Just wanting to confirm the correct wheel nuts for the Australian Clubman GT. At the moment I have two different wheel nuts. Which would be correct in the below photo - Thanks |
|
| Author: | winabbey [ Sat Dec 07, 2024 1:53 pm ] |
| Post subject: | Re: GT Wheel Nuts |
This might help. Would be a good idea to measure the taper to confirm they are 60 degrees. Attachment: C 22_71.jpg https://www.ebay.com.au/itm/28170611858 ... ybU5Sf1_y9 https://www.minispares.com/cn2-wheel-nu ... at-1984-on There's an extract from the AHA8785 engineering drawing showing the precise measurements in Tony Cripps Mini Clubman and GT engineering series book. https://www.leylandaustralia.com.au/shop.htm |
|
| Author: | 68+86auto [ Sat Dec 07, 2024 9:04 pm ] |
| Post subject: | Re: GT Wheel Nuts |
The one on the right looks like it would be a universal aftermarket part due to the number 5 on it. |
|
| Author: | Timbo [ Mon Dec 09, 2024 4:05 pm ] |
| Post subject: | Re: GT Wheel Nuts |
They appear to be the same as the ones used on Moke Californians with sunraysia wheels, but there are some interesting comments on the MokeWerx website about reproductions and later UK wheel nuts that apparently have the same 60° angle but different seat areas. https://www.moke.com.au/in-the-garage/135-wheels-and-tyres/395-sunraysia-wheel-nuts Now I'm wondering about the set of supposedly NOS sunraysia ones I have... Tim |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|