ausmini
https://www.ausmini.com/forums/

Query about pollution gear on a Clubman..
https://www.ausmini.com/forums/viewtopic.php?f=2&t=10410		 Page 1 of 2
Author:  DJG-14U [ Tue Aug 23, 2005 4:30 pm ]
Post subject:  Query about pollution gear on a Clubman..
Hi was wondering if anyone can please tell me if the compressor or pump if that is what it is called is suppose to turn freely? As mine is bolted to the engine but I cannot turn it over by hand it seems to be seized.. Or does it need to be connected up to the engine before it turns over? Also if it is seized is there anyway I can get this fixed?

Thanks..
Author:  awdmoke [ Tue Aug 23, 2005 4:43 pm ]
Post subject: 
Yes it should turn freely.
To fix it, remove the pump complete with it's mounting bracket, and as you're in Sydney,
take it to the harbour and drop it in at the deepest part.

Remove & block off the redundant hoses. Fixed :wink: :D
Author:  arpy69 [ Tue Aug 23, 2005 5:00 pm ]
Post subject: 
I like the idea of ditching it, mine only has the canister. One of the hoses goes to the rocker and one to the float chamber. Do I block off both? Wont the rocker one need to go somewhere?
Author:  poeee [ Tue Aug 23, 2005 5:01 pm ]
Post subject: 
If you didn't get what awd was saying... he means that the air pump is completely useless! It infact made the car run worse, and didn't help the pollution at all (some say it made it worse!).

Remove it and fill the holes with grub screws.
Author:  arpy69 [ Tue Aug 23, 2005 5:16 pm ]
Post subject: 
What about the canister though, can I get rid of that?
Author:  DJG-14U [ Tue Aug 23, 2005 5:16 pm ]
Post subject: 
Ok thanks for you replies :)..

All the pollution gear on Granny is intact and connected. Just that the fan belt is missing from the air pump and I cannot seem to turn the air pump over.

Granted that you say I should remove it and throw it in the harbour and if Granny wasnt so perfect I would consider this :). But the thing is Granny is so original right down to the tool kit in the plastic bag in the boot and I want to keep her that way :). So I would prefer to get this air pump fixed if possible. Its probably not what you want to hear I know.. But Granny only gets driven at the weekends if that so I would like to keep her 100% original with everything working :)..

So any additional help will be very much appreciated..
Author:  fuzzy-hair-man [ Tue Aug 23, 2005 5:36 pm ]
Post subject: 
Just leave the belt off and run it as is....
if you need the air pump then get it fixed latter on I reckon :wink:

I reckon getting rid of all the pollution gear makes it obvious to a RTA inspectory person that you have just got rid of it all (probably in the interests of performance). If it is still there but not working they won't be as bad I reckon (it just stopped working and parts have become unavailable) and if they insist that it needs to be working then you don't have to go and find as many no longer available parts :x :roll:
Author:  awdmoke [ Tue Aug 23, 2005 5:38 pm ]
Post subject: 
arpy69 wrote:
What about the canister though, can I get rid of that?


You can, but it seems to be the one thing that cops/inspectors look for.
They are useless unless you replace the charcoal every 2 years
I threw out the charcoal & just stuffed some cotton wool in it to keep bugs'n'dust out :)

Oh, and DJ, if you put a post in the Wanted section I'm sure someone will give you a replacement pump for nix (if you can find someone who was too lazy to drive to the harbour) :wink:
Author:  J_A_M [ Tue Aug 23, 2005 10:43 pm ]
Post subject: 
arpy69 wrote:
What about the canister though, can I get rid of that?


I ditched mine tonight...it's absolutely useless, and looks really ugly :x

I hereby have NO anti pollution gear in my 8/76 Clubby (it should have ALL of it) :lol:
Author:  drmini in aust [ Tue Aug 23, 2005 11:02 pm ]
Post subject: 
J_A_M wrote:
arpy69 wrote:
What about the canister though, can I get rid of that?


I ditched mine tonight...it's absolutely useless, and looks really ugly :x

I hereby have NO anti pollution gear in my 8/76 Clubby (it should have ALL of it) :lol:

Anybody feels the need for a canister I've got a few.. :lol: they nearly went in the Otto bin yesterday... :P
Author:  Wolfman [ Tue Aug 23, 2005 11:02 pm ]
Post subject: 
I here ya Anton, Mine went through a full inspection from a mechanic and the motor registry with no pollution gear at all and noone noticed or cared and it's a '78 :lol:
Author:  drmini in aust [ Tue Aug 23, 2005 11:05 pm ]
Post subject: 
We put a Mk1 S motor and Weber into a 78 Clubby once, and for the blueslip they didn't give a toss. Just checked it had discs under there.. :lol:
Must have been the nice later Police issued engine number...N89****P
Author:  min13k [ Wed Aug 24, 2005 12:18 am ]
Post subject: 
erica if you really want a pump i have one here some were
makka
Author:  arpy69 [ Wed Aug 24, 2005 9:03 am ]
Post subject: 
JAM, can you tell me what you did with the various hoses etc. Did you just plug up all of the holes or do some of them still need to breathe?
Author:  DJG-14U [ Wed Aug 24, 2005 9:22 am ]
Post subject: 
Thanks everyone for all your replies :)..

Im not to worried about increasing the performance or anything like that on Granny. But more concerned about keeping her original. Besides sooner or later I will end up with a Cooper S and I will be more than happy with the performance from that :)..

Thanks Makka For your kind offer. I am quite happy to pay you for it as I dont want you to be out of pocket and will send you a PM now..
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/