Here's a couple:
http://www.minifinity.com/TechnicalWiki-index-page-Styling.html
| ausmini https://www.ausmini.com/forums/ |
|
| Dash https://www.ausmini.com/forums/viewtopic.php?f=2&t=10466 |
Page 1 of 2 |
| Author: | Booglie [ Wed Aug 24, 2005 8:36 pm ] |
| Post subject: | Dash |
I was wondering if any one has dash plans or diagrams for a clubman or know where to find them??? |
|
| Author: | Marvin [ Wed Aug 24, 2005 9:18 pm ] |
| Post subject: | |
Here's a couple:
http://www.minifinity.com/TechnicalWiki-index-page-Styling.html |
|
| Author: | WhoDat [ Wed Aug 24, 2005 9:28 pm ] |
| Post subject: | |
And for a clubbie there was always the problem of making the bit around the clock face look smik. Here's how it's done. A couple bits of MDF and a router and you can have one too. 
|
|
| Author: | Booglie [ Wed Aug 24, 2005 9:34 pm ] |
| Post subject: | |
Good diagrams, I'm going to get an aluminium one made (should be cheaper than wood) and fit custom gauges |
|
| Author: | min13k [ Thu Aug 25, 2005 4:17 am ] |
| Post subject: | |
hmmmmmm maybe i should take some fotys of mine and measure it or something makka |
|
| Author: | Harley [ Thu Aug 25, 2005 9:11 am ] |
| Post subject: | |
Has anyone got a diagram of a dash that would fit in without needing the clubby top rail? |
|
| Author: | Marvin [ Thu Aug 25, 2005 9:11 am ] |
| Post subject: | |
WhoDat - how is the gauge part held in on an angle? |
|
| Author: | DJG-14U [ Thu Aug 25, 2005 9:36 am ] |
| Post subject: | |
Marvin wrote: WhoDat - how is the gauge part held in on an angle?
Angled pieces of mdf or timber at the sides would be the go I think  ..
BTW Makka if you ever take your dash out I think making up a template from it would be fantastic . I could even get my partners father to make one up or perhaps a couple as he has a full cabinet makers workshop and my partners brother has his own cabinet making business and has represented Australia in a worldwide cabinet making contest overseas . He also makes gorgeous furniture and it's all the old tongue and groove stuff. Not like this disposable cheap junk you buy in stores today..
|
|
| Author: | Marvin [ Thu Aug 25, 2005 9:39 am ] |
| Post subject: | |
Yes well that was obvious but his looks pop rivetted |
|
| Author: | sociallydisabled [ Thu Aug 25, 2005 1:06 pm ] |
| Post subject: | |
i think we need a how too on the holder for the guages...  please?
|
|
| Author: | min13k [ Thu Aug 25, 2005 2:05 pm ] |
| Post subject: | |
erica it is out at the moment if you want to come grab it and take it to them to get it copy'd i'd need it back in a week i supouse makka |
|
| Author: | Marvin [ Thu Aug 25, 2005 2:40 pm ] |
| Post subject: | |
Now there's a nice hour or so drive! Picton - shidankee |
|
| Author: | min13k [ Thu Aug 25, 2005 3:17 pm ] |
| Post subject: | |
marv 45 min's picton to bossley park ...... and thats drivin slow in the turquoise beast from smithfield to razorback (wifes uncle lives up there on the escarpment ) 30 mins the tyres were hardly on the grond 
makka |
|
| Author: | DarkenMini [ Thu Aug 25, 2005 3:34 pm ] |
| Post subject: | |
hey funny that this Post has come up, i was thinking about how i could go about doing a Dash for my club man and now i have some plans or a they for a round nose is there much difference between Round nose and clubman dash Sewtup apart from the speedo being in the middle for roundnose?. um that miniifinity web site is CHOICE that centre console Plans look good BUT are they for Clubman or Round nose once again? |
|
| Author: | benoz [ Thu Aug 25, 2005 3:56 pm ] |
| Post subject: | |
If anyone does do some full size copies of that plan run off a copy for me, I'd be happy to cover copying costs, post etc |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|