I've heard Tilleys at Brookvale are good- anyhow their race cars are all bloody fast!
| ausmini https://www.ausmini.com/forums/ |
|
| Dyno Time https://www.ausmini.com/forums/viewtopic.php?f=2&t=1049 |
Page 1 of 1 |
| Author: | mini bug [ Mon Jul 05, 2004 6:37 pm ] |
| Post subject: | Dyno Time |
Does anyone know were a good dyno place (rolling road) is in Sydney, as I have put a new head on my mini and the needle is wrong and the distributor needs a re-map. |
|
| Author: | drmini in aust [ Mon Jul 05, 2004 8:39 pm ] |
| Post subject: | |
I've heard Tilleys at Brookvale are good- anyhow their race cars are all bloody fast!
|
|
| Author: | gafmo [ Mon Jul 05, 2004 9:51 pm ] |
| Post subject: | |
Myself would be Frank Kllinning in Giraween but the Dr has been around The Mini more than more I have. But The Dr hs say that the MCC showed up late last year and not many were up over the 50 mark. I Like his truthness. he charges around 115 for a RR but you shoulod book about a week ahead. call 1234 and ask for the above at Giraweena adn connect. and ask guestions, always Thats my too bob |
|
| Author: | min13k [ Wed Jul 07, 2004 7:57 am ] |
| Post subject: | |
yup frank klinig motors magowar rd girraween i think it is i have had the clubby on the rollers there and they know how to work it makka |
|
| Author: | gafmo [ Wed Jul 07, 2004 4:08 pm ] |
| Post subject: | |
Frank Kleinig Motors 5 Amex Ave Girraween Phn:9896 3672 Book a week ahead |
|
| Author: | kasperflipped [ Wed Jul 07, 2004 5:09 pm ] |
| Post subject: | |
What about in melbourne, anyone know of anywhere good??? |
|
| Author: | drmini in aust [ Wed Jul 07, 2004 7:13 pm ] |
| Post subject: | |
Hey Makka, how many HP didja get on Frank's rollers? 
|
|
| Author: | min13k [ Fri Jul 09, 2004 5:34 pm ] |
| Post subject: | |
49.9 o and btw i found out why the motor was feeling a little lazy .......... piston slap i can rock the pistons in the bore quiet easy 
makka |
|
| Author: | willy [ Fri Jul 09, 2004 5:38 pm ] |
| Post subject: | |
My 998 pulled 61.8HP. The people there were quite surprised 
Well, this 998 is no more. I am getting an 1100 transplanted in its place next week some time. 1100 specs: Rebored 40thou (1132) Mild ground cam Extractors HS4 Carburettor Engine rebuilt March 02, $2000 of reciepts. Carb rebuilt at same time. Going there tomorrow to check it out and put the deposit down. |
|
| Author: | min13k [ Fri Jul 09, 2004 6:25 pm ] |
| Post subject: | |
but as i said the motor was rooted piston slap makka |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|