ausmini • View topic - Rear Valance?

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Rear Valance?

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 14 posts ]

Print view

Previous topic | Next topic

Author

Message

Fruity

Post subject: Rear Valance?

Posted: Tue Aug 30, 2005 10:19 am

1275cc

Joined: Fri Jan 07, 2005 6:58 pm
Posts: 2269

My rear valance has a deepish ding in the right hand corner which I found after wire wheeling

There is no rust surprisingly should I repair the ding or put another valance on?

How hard is it to replace the valance myself? Can you buy them new? Where is the best place to buy one (besides ebay)?

Top

min13k

Post subject:

Posted: Tue Aug 30, 2005 10:24 am

I DWIVE A BIG TWUCK

Joined: Tue Mar 16, 2004 5:17 pm
Posts: 8732

you can get new from karcraft ...gee fell like i'm repeating my self lol
51.43 pn czh3353 <b>
makka

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".

Top

drmini in aust

Post subject:

Posted: Tue Aug 30, 2005 10:28 am

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39757
Location: near Baulkham Hills, NSW

You can tack weld a washer to it, then pull it out with a slide hammer.
Bloody sight easier than fitting a new one... :lol:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Last edited by drmini in aust on Tue Aug 30, 2005 10:29 am, edited 1 time in total.

Top

Fruity

Post subject:

Posted: Tue Aug 30, 2005 10:29 am

1275cc

Joined: Fri Jan 07, 2005 6:58 pm
Posts: 2269

I looked in the Karcraft parts catalogue and I couldn't see it listed

Top

drmini in aust

Post subject:

Posted: Tue Aug 30, 2005 10:30 am

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39757
Location: near Baulkham Hills, NSW

It's under beaver panel... rear. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

min13k

Post subject:

Posted: Tue Aug 30, 2005 10:31 am

I DWIVE A BIG TWUCK

Joined: Tue Mar 16, 2004 5:17 pm
Posts: 8732

it is not listed as a valance
it is listed as your beaver

i mean beaver panle
makka

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".

Top

min13k

Post subject:

Posted: Tue Aug 30, 2005 10:31 am

I DWIVE A BIG TWUCK

Joined: Tue Mar 16, 2004 5:17 pm
Posts: 8732

hey kev did ya find the bits ??
makka

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".

Top

Fruity

Post subject:

Posted: Tue Aug 30, 2005 10:32 am

1275cc

Joined: Fri Jan 07, 2005 6:58 pm
Posts: 2269

Thankyou guys

Top

min13k

Post subject:

Posted: Tue Aug 30, 2005 10:33 am

I DWIVE A BIG TWUCK

Joined: Tue Mar 16, 2004 5:17 pm
Posts: 8732

no wucken furries

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".

Top

drmini in aust

Post subject:

Posted: Tue Aug 30, 2005 10:35 am

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39757
Location: near Baulkham Hills, NSW

min13k wrote:

hey kev did ya find the bits ??
makka

Hey yeah thanks.
I'm home today, finally getting roller doors put on the `garage'... :lol:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

GT1360

Post subject:

Posted: Tue Aug 30, 2005 10:35 am

Postally Verbose

Joined: Thu Mar 17, 2005 12:58 pm
Posts: 5748
Location: Richmond.... NSW

yeah. i got my new beaver panel a few weeks back. 59.40 delivered the same day from Karcraft.

not that hard to put on really. lot easer then trying to put new one on and depunber at the same time.. (never again)

Top

J_A_M

Post subject:

Posted: Tue Aug 30, 2005 10:36 am

1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068

I put a new Beaver on JAM....and everyone said WTF is a Beaver?!?!? So I changed it to VALANCE :lol:

How can a bunch of blokes not know what a beaver is?!

Top

drmini in aust

Post subject:

Posted: Tue Aug 30, 2005 10:37 am

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39757
Location: near Baulkham Hills, NSW

Pity the front bastard isn't as cheap as the rear. Looks like I braze mine up again, for another 10 years!! :lol:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

min13k

Post subject:

Posted: Tue Aug 30, 2005 10:37 am

I DWIVE A BIG TWUCK

Joined: Tue Mar 16, 2004 5:17 pm
Posts: 8732

they are furry creatures and are pink inside :shock:

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".

Top

Page 1 of 1

[ 14 posts ]

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 96 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: