Ausmini
It is currently Sun Aug 10, 2025 12:36 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
rampage101
 Post subject: Carby Identification
PostPosted: Fri Sep 02, 2005 3:05 pm 
Offline
998cc
998cc
User avatar

Joined: Wed Mar 17, 2004 8:52 am
Posts: 734
Location: NSW Australia
Image

I have this carby, just got it for $10 off ebay. But, I don't understand all the extra piping. Its a 1.1/2 SU, but thats as much as I know. Ideas??
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Fri Sep 02, 2005 3:07 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
fuel return?
Top
 Profile  
 
min13k
 Post subject:
PostPosted: Fri Sep 02, 2005 3:13 pm 
Offline
I DWIVE A BIG TWUCK
I DWIVE A BIG TWUCK
User avatar

Joined: Tue Mar 16, 2004 5:17 pm
Posts: 8732
could be from a 6 triple setup the plastick tube is were the stink pipe off the rocker cover or whatever goes to
makka

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".
Top
 Profile  
 
rampage101
 Post subject:
PostPosted: Fri Sep 02, 2005 3:17 pm 
Offline
998cc
998cc
User avatar

Joined: Wed Mar 17, 2004 8:52 am
Posts: 734
Location: NSW Australia
Umm, ok :?
So, what do I do? Block some of them off?
Top
 Profile  
 
Morris 1100
 Post subject:
PostPosted: Fri Sep 02, 2005 7:03 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
The two hoses to the float bowl are fuel from the pump and the vent to the charcoal cannister.
The hose to the side of the carby is the vac line to the dizzy
The plastic tube into the side of the carb above the float bowl is from the pcv valve.
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Sep 02, 2005 7:28 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
Morris 1100 wrote:
The two hoses to the float bowl are fuel from the pump and the vent to the charcoal cannister.
The hose to the side of the carby is the vac line to the dizzy
The plastic tube into the side of the carb above the float bowl is from the pcv valve.

Um... it's from the crankcase breather. PCV valve (into manifold)was replaced by this vac line into the SU body. It works, sort-of. Not as good as the old PCV... :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: Bing [Bot] and 91 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.