| ausmini https://www.ausmini.com/forums/ |
|
| Need new exhaust - Stock or better? https://www.ausmini.com/forums/viewtopic.php?f=2&t=10959 |
Page 1 of 1 |
| Author: | TimB [ Fri Sep 09, 2005 10:53 am ] |
| Post subject: | Need new exhaust - Stock or better? |
One of the things my stock 1100 clubman will need is a new exhaust system. Do I go for a standard issue or is there something better. Tim |
|
| Author: | fuzzy-hair-man [ Fri Sep 09, 2005 10:55 am ] |
| Post subject: | |
RC40 Cheap and good. |
|
| Author: | J_A_M [ Fri Sep 09, 2005 10:58 am ] |
| Post subject: | |
Don't get anything larger than 1.75" diameter. I have an LCB and 2" system..... and it's a little large.....AND NOISY!! |
|
| Author: | TimB [ Fri Sep 09, 2005 11:00 am ] |
| Post subject: | |
Is an RC40 the complete exhaust system? Excuse my ignorance but do go into any exhaust shop and ask for the RC40 or is it a mini specialist thingy? |
|
| Author: | Bromley [ Fri Sep 09, 2005 11:07 am ] |
| Post subject: | |
Good question! I would also like to know more about what an RC40 is. |
|
| Author: | fuzzy-hair-man [ Fri Sep 09, 2005 11:08 am ] |
| Post subject: | |
RC40 is the muffler bit, It is not a mini specific bit AFAIK. A 1.75" exhaust seems to be standard for a 1275 or 1100. LCB (Long centre branch) extractors out perform 3 into 1s but not by much (according to Vizard) so it is up you there. Maybe my first post was a bit brief  
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|