Hel all, well the little yellow beastie is getting closer to having its "total rebuild" one of these days, and I've started collecting panels in readyness ...
So far I have a Pair of NOS Guards (No arial hole - yay!) and a Driver's door skin (new)

I'll need

Driver's and Passenger's Floor panels
Passenger Door Skin
Boot Skin

ok, as the topic says, where and how many pacific Pesos ?

Cheers
J

_________________

Front floor panels LH, RH are around $42 each ar Karcraft. Get the pre-rod change ones for yours..

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

is there anything they DONT sell ????

Wonderful.....

Kev, you got a Mig ?

Carton ?
J

_________________

I gotta say it's a pig of a job when you're old... after welding one panel in, I ached all over and so I got my mate to do the other.
Then I turned it 90* on the spit and welded undersides too- that was the easy part.

It all came back to haunt me last Sunday, putting a patch in my son's Clubbie's floor.. ouch!

BTW, taking the steering column out is a real good idea when doing the RH one. Otherwise there's room in there for you or the welding helmet, but not both..

So yeh I gotta MIG, no I don't wanna do any more front floor panels thanks...

email me and we'll discuss alternatives..

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

i have a mate who can do em at a price i'll let you know
makka

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".