ausmini
https://www.ausmini.com/forums/

Buying Panels ? Where ? How Much ?
https://www.ausmini.com/forums/viewtopic.php?f=2&t=1103		 Page 1 of 1
Author:  kazjim [ Fri Jul 09, 2004 9:02 pm ]
Post subject:  Buying Panels ? Where ? How Much ?
Hel all, well the little yellow beastie is getting closer to having its "total rebuild" one of these days, and I've started collecting panels in readyness ...
So far I have a Pair of NOS Guards (No arial hole - yay!) and a Driver's door skin (new)

I'll need

Driver's and Passenger's Floor panels
Passenger Door Skin
Boot Skin

ok, as the topic says, where and how many pacific Pesos ?

Cheers
J
Author:  drmini in aust [ Fri Jul 09, 2004 9:27 pm ]
Post subject: 
Front floor panels LH, RH are around $42 each ar Karcraft. Get the pre-rod change ones for yours..
Author:  kazjim [ Fri Jul 09, 2004 9:37 pm ]
Post subject: 
is there anything they DONT sell ????

Wonderful.....

Kev, you got a Mig ? :roll:

Carton ?
J
Author:  drmini in aust [ Fri Jul 09, 2004 9:52 pm ]
Post subject: 
I gotta say it's a pig of a job when you're old... after welding one panel in, I ached all over and so I got my mate to do the other.
Then I turned it 90* on the spit and welded undersides too- that was the easy part.

It all came back to haunt me last Sunday, putting a patch in my son's Clubbie's floor.. ouch! :cry:

BTW, taking the steering column out is a real good idea when doing the RH one. Otherwise there's room in there for you or the welding helmet, but not both..

So yeh I gotta MIG, no I don't wanna do any more front floor panels thanks... :x

email me and we'll discuss alternatives.. :wink:
Author:  min13k [ Sat Jul 10, 2004 12:56 am ]
Post subject: 
i have a mate who can do em at a price i'll let you know
makka
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/