| ausmini https://www.ausmini.com/forums/ |
|
| Rover Mini Front Cuts https://www.ausmini.com/forums/viewtopic.php?f=2&t=1118 |
Page 1 of 2 |
| Author: | aaron [ Sat Jul 10, 2004 7:12 pm ] |
| Post subject: | Rover Mini Front Cuts |
Does Anyone have a name for someone importing Rover Mini Front Cuts. I am looking For one at the moment. Cheers Aaron |
|
| Author: | ausminis4u [ Sat Jul 10, 2004 8:23 pm ] |
| Post subject: | Re: Rover Mini Front Cuts |
aaron wrote: Does Anyone have a name for someone importing Rover Mini Front Cuts. I am looking For one at the moment. northern mini parts do im pretty sure m8
Cheers Aaron |
|
| Author: | aaron [ Sat Jul 10, 2004 8:30 pm ] |
| Post subject: | |
Thanks, i was hoping to find a non mini impoter that happens to bring in the occassional one. But will check them out. Cheers Aaron |
|
| Author: | JC [ Sat Jul 10, 2004 9:14 pm ] |
| Post subject: | |
Location aaron? |
|
| Author: | willy [ Sat Jul 10, 2004 10:06 pm ] |
| Post subject: | |
Theres one in the rag today. In adelaide btw. The place is called "Brickworx Racing" Phone 08 8297 9494. They do do a lot of importing and i'm sure you could have one freighted out to you at a minimal cost if it is sent with a batch of their other stuff to mini suppliers. |
|
| Author: | aaron [ Sat Jul 10, 2004 11:18 pm ] |
| Post subject: | |
I'm in sydney but would be happy to get it from brisbane or melbourne if neccesary. Adelaide is probably a little too far. Cheers aaron |
|
| Author: | supercharged 850 [ Sun Jul 11, 2004 2:30 am ] |
| Post subject: | |
adelaide also seems a bit pricey for automotive stuff too, compared to sydney.... adelaide being 10 to 15% dearer....  ... i guess thats why all the caryards around here have cars with NSW plates on em.....
I've got a guy lookin for a Statesman for me in Sydney right now... cos they're around 3 grand cheaper.... go figure |
|
| Author: | mutant mini [ Tue Jul 13, 2004 12:06 pm ] |
| Post subject: | |
Only place that I think brings front cuts would be Brickworx Racing. Don't think NMP does it. |
|
| Author: | bnicho [ Tue Jul 13, 2004 1:01 pm ] |
| Post subject: | |
Northern Mini used to sell front cuts when it was owned by Henry Draper. I'm not sure if they still do. Most of the Jap parts (Toyota, Nissan, Bits-a-missing, etc) importers are not interested in Mini stuff. But you could try a couple - they may be able to get one for you. |
|
| Author: | supercharged 850 [ Wed Jul 14, 2004 1:29 am ] |
| Post subject: | |
brickworx definitely has em - here's his current trading post ad.... MINI PARTS, 1275 front end including discs, can test drive $2500. Injected 1.3 front cut with air condition $4500. Supercharger with manifold $500. 1275 turbo engine. 12in mag wheel sets from $600. 10 x 6 racing rims. Come and see our new range of Rover Minis for sale, spares and wrecking. Brickworx Racing, 872-874 South Road EDWARDSTOWN 08-8297 9494 |
|
| Author: | aaron [ Wed Jul 14, 2004 10:38 am ] |
| Post subject: | |
Interesting to see that they have a front cut for 4.5k, they quoted me 6.5k. What a surprise! |
|
| Author: | J_A_M [ Wed Jul 14, 2004 10:47 am ] |
| Post subject: | |
...not what you know but who you know ey Aaron...?!?! I was quite shocked at 6.5k for a front cut....what does it make the ass end worth....$1.... 
|
|
| Author: | bnicho [ Wed Jul 14, 2004 11:00 am ] |
| Post subject: | |
Even $4500 is a rip off if you ask me. 
Front cuts for most modern turbo rice-boy cars are cheaper and there is probably more demand for them! |
|
| Author: | supercharged 850 [ Thu Jul 15, 2004 12:45 am ] |
| Post subject: | |
bnicho wrote: Even $4500 is a rip off if you ask me.
Front cuts for most modern turbo rice-boy cars are cheaper and there is probably more demand for them! yes its a bit pricey, but thats cos he has no competition for sales... you'll find hundreds of jap importers around the place, thats why the prices are low..... ... but then again, put a price on every part individually and see what you get... 
|
|
| Author: | Minimad [ Thu Jul 15, 2004 9:41 am ] |
| Post subject: | |
Check out the for sales at the miniowners car club site 
1999 Rover Cooper. Manual 1.3l with A/C, EFI (single point), disc brakes, air bag, leather interior, timber dash. Car has been cut for import after heavy left side impact. It is a manual with 23,000km on the clock. No damage to the engine, gearbox or front subframe or suspension. Almost all parts with car except radio and keys. Included are doors, seats, carpets, mat, all glass, complete catalyst exhaust, 4 steel wheels. Engine runs, A/C works. Digital photos available. $5250 ono. Ph Mark 0408 015127. http://www.miniownersclub.com/mini_trader.htm Is this what you are looking for?? Minimad |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|