Nya ideas on ways to make a cold air induction on a Mini.

I was just thinking of running a Flexi hose bout 1-2 Inches in diameter from under the front of the car up to the Air cleaner.

Not to sure what eles I can do.

I have heard of people making up a bent pipe that goes onto the Card (SU) and sits around in front of the Motor on the Clutch housing side.

_________________
I've Got One
You've Got One
We've All Got One
What Is It



A Bloody Mini

1970 Mini K, 1380cc, 1.75 HIF SU, 30 70 Cam, 2" Zorts
1969 Mini K, Stock Standard and Orginal. (Slow as Hell)

I didn't think you had `cold air' up in Qld..

Your idea is OK but use 3" heater ducting or similar, thet's what a lot of race cars do. But they don't attach it to the carb- just take the air up to near it (ramtube or sports filter).

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

what a great idea! Cold air intake.. sounds impressive too
I thinks there's a section in David Vizards MTMYM on ram air intake, would prolly mean cutting a hole in the bonnet and a scoop but

_________________
78 van 1300 cam extractors weber, 12" Superlights Metros Konis HiLos MP3 Amp Sub Alpine speakers and lots of fur
www.crazybitchracing.com

Thats the main reason why i want to do it. To try and get cooler air into that area istead of the warm air from around the engine and strags.

_________________
I've Got One
You've Got One
We've All Got One
What Is It



A Bloody Mini

1970 Mini K, 1380cc, 1.75 HIF SU, 30 70 Cam, 2" Zorts
1969 Mini K, Stock Standard and Orginal. (Slow as Hell)