Get a compression test done. Then if they are all good and all about the same, then it's probably worth something.
| ausmini https://www.ausmini.com/forums/ |
|
| Please Help - What should I pay for an 1100 engine? https://www.ausmini.com/forums/viewtopic.php?f=2&t=11505 |
Page 1 of 1 |
| Author: | Bromley [ Sat Sep 24, 2005 6:54 pm ] |
| Post subject: | Please Help - What should I pay for an 1100 engine? |
I am looking for an 1100 engine for the van. A few people have contacted me on the forums but they don't reply after I make them an offer. If the engine is out of the car and said to be running what should I be offering? |
|
| Author: | meeni [ Sat Sep 24, 2005 6:56 pm ] |
| Post subject: | |
depends really mine came out of a running car and paid 200 bucks for it, although previously to that i paid 400 for one, so it varies, probably wouldnt go much over 450 though |
|
| Author: | Bromley [ Sat Sep 24, 2005 7:04 pm ] |
| Post subject: | |
I think that for $400 I would want to hear the engine running in the car. Any suggestions on someone that might have one for around the $300 mark. |
|
| Author: | poeee [ Sat Sep 24, 2005 7:10 pm ] |
| Post subject: | |
Get a compression test done. Then if they are all good and all about the same, then it's probably worth something.
|
|
| Author: | min13k [ Sat Sep 24, 2005 10:36 pm ] |
| Post subject: | |
brom i may not 100% sure if i am but may well be selling the 1100 in the replacement 44.4 hp on the dyno but with out box as i said i'm not 100% sure but yet i have to finish the 1275 first though makka |
|
| Author: | 9YaTaH [ Sun Sep 25, 2005 9:51 am ] |
| Post subject: | Re: Please Help - What should I pay for an 1100 engine? |
Bromley wrote: I am looking for an 1100 engine for the van. A few people have contacted me on the forums but they don't reply after I make them an offer.
If the engine is out of the car and said to be running what should I be offering? Andy...they were probably reverse tyre kickers... 
ohhhh!! ohhhh! I have an 1100...I wonder what he would pay for it    
Pay as little as possible (100-200)...it could be a nice heavy doorstop  ....you may be up for 100s in overhaul costs....
BUT if you can see receipts for work done and you know the person very well and trust them implicitly....then consider buying something a little more expensive (300-1000) |
|
| Author: | Bromley [ Sun Sep 25, 2005 10:39 am ] |
| Post subject: | |
Thanks for the advice Poeee and Mick! Makka If you do want to sell let me know. If anyone comes up with something let me know. I am willing to pay good money for the "right" engine. Cheers Andy. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|