Just in case I had other people curious,
According to the bible (vizard
)
Both versions of the Cooper S cam had a lobe centreline angle of 110 degrees. He recomends advancing this by a couple of degrees.
Damn his book is good!
Cheers
matt
| ausmini https://www.ausmini.com/forums/ |
|
| Timing Figures for a cooper s cam. https://www.ausmini.com/forums/viewtopic.php?f=2&t=11991 |
Page 1 of 1 |
| Author: | Matt68 [ Mon Oct 10, 2005 8:59 am ] |
| Post subject: | Timing Figures for a cooper s cam. |
Hi, I have a camshaft which I was told was reground to a Cooper S profile. Does anyone know what timing figure should be used? Also, it is in the car, so is there any way I can check/read the profile to be sure what it is? Cheers matt |
|
| Author: | Matt68 [ Tue Oct 11, 2005 9:13 am ] |
| Post subject: | |
Just in case I had other people curious, According to the bible (vizard )
Both versions of the Cooper S cam had a lobe centreline angle of 110 degrees. He recomends advancing this by a couple of degrees.
Damn his book is good! Cheers matt |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|