ausmini
https://www.ausmini.com/forums/

Compression on a 1098
https://www.ausmini.com/forums/viewtopic.php?f=2&t=12117		 Page 1 of 1
Author:  awdmoke [ Thu Oct 13, 2005 6:39 pm ]
Post subject:  Compression on a 1098
Can anyone tell me what the readings should be for a compression test on a 1098 ?

Bear in mind I'm testing cold:

10.25 bar
11.0
10.5
11.25
Author:  poeee [ Thu Oct 13, 2005 6:55 pm ]
Post subject: 
What's that in PSI? :lol:

150 is ok (wet and hot, I think), any better, good. They should all be in about 10% of each other, too.
Author:  awdmoke [ Thu Oct 13, 2005 7:12 pm ]
Post subject: 
BeauT :D

150psi is 10.25 bar - the lowest reading

Looks like we have a goer. Just got to get a dizzy!


Thanks Poeee :D
Author:  benoz [ Thu Oct 13, 2005 7:36 pm ]
Post subject: 
Better nick than you would have thought looking at the old girl, but you get lucky sometimes Mike! Mind you how much more luck you con expect than finding a mini k with no structural rust and a good engine I am not sure 8)
Author:  awdmoke [ Thu Oct 13, 2005 9:50 pm ]
Post subject: 
Maybe I can sell the primed shell & get my $150 back ? :lol: :lol: :lol:
Author:  benoz [ Fri Oct 14, 2005 1:47 am ]
Post subject: 
Good chance I'd say, the floor pan wasn't so great but the rest was ok ish.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/