ausmini https://www.ausmini.com/forums/ |
|
JAM - Hi Lo'd https://www.ausmini.com/forums/viewtopic.php?f=2&t=12139 |
Page 1 of 2 |
Author: | J_A_M [ Fri Oct 14, 2005 9:21 am ] |
Post subject: | JAM - Hi Lo'd |
My bargain bling hi-lo's (new $40) came to me recently via my bro, who came back to OZ for a holiday. ![]() Thanks to Aaron for the loan of the cone compressor. Damn handy tool that. Standard trumpets came out piss easy, without having to butcher them! Just a tip, removing the bump stop rubber from below the top arm gives you more downward travel of the suspension. ![]() ![]() The front now sits at a decent height, not 4x4 height. I cannot believe how much better it looks.....gee it looked bad sitting so high!! ![]() ![]() ![]() I'll take it out for a spin tomorrow and see if it handles any better ![]() |
Author: | aaron [ Fri Oct 14, 2005 9:37 am ] |
Post subject: | |
Well done mate. It never is too difficult if all the parts are clean and well maintained. Cheers Aaron |
Author: | Zizzle [ Fri Oct 14, 2005 10:38 am ] |
Post subject: | |
Wow look at the inside of that guard... pristine! You need to get out and drive it some more ![]() And how did you get them so cheap? |
Author: | awdmoke [ Fri Oct 14, 2005 10:50 am ] |
Post subject: | |
$40 ??? You should have bought a box of them! Nice shopping ![]() |
Author: | J_A_M [ Fri Oct 14, 2005 11:12 am ] |
Post subject: | |
(I clean the inner guards after every run) ![]() Hi Lo's were bought in the UK....now I know they are good, I will get some more ![]() $40 included postage to my bros house in London. ![]() |
Author: | Fruity [ Fri Oct 14, 2005 11:57 am ] |
Post subject: | |
J_A_M wrote: (I clean the inner guards after every run)
![]() Awww that's true love ![]() |
Author: | arpy69 [ Fri Oct 14, 2005 12:30 pm ] |
Post subject: | |
Where did your bro get them from? I am going to the UK in March and I am starting to put together a shopping list to use up the Kids luggage allowances on the way back ![]() Cheers Rick |
Author: | GT1360 [ Fri Oct 14, 2005 12:46 pm ] |
Post subject: | |
You know Jim is going to have his dick out now when he sees the bling ![]() Hope it settles down to a nice ride hight now.. and no more snobby nose in the air JAM. ![]() |
Author: | drmini in aust [ Fri Oct 14, 2005 3:04 pm ] |
Post subject: | |
Um... you will now need another wheel alignment- it was sitting so high before, no way is toe-out correct now. ![]() Betcha a slab... ![]() |
Author: | GT1360 [ Fri Oct 14, 2005 3:08 pm ] |
Post subject: | |
drmini in aust wrote: Um... you will now need another wheel alignment- it was sitting so high before, no way is toe-out correct now.
![]() Betcha a slab... ![]() I see you have not restocked the fridge then Kev. ![]() |
Author: | drmini in aust [ Fri Oct 14, 2005 3:27 pm ] |
Post subject: | |
No stock left. Somebody had a party while I was away.. ![]() I'm covering all the freebie bases. Now, who owes me beer... ![]() ![]() |
Author: | GT1360 [ Fri Oct 14, 2005 3:32 pm ] |
Post subject: | |
I tolf you to start the home brew..... ![]() ![]() |
Author: | J_A_M [ Fri Oct 14, 2005 3:36 pm ] |
Post subject: | |
yea I was going to get another wheel alignment ![]() Hey if you want beer, I have a small job worthy of a slab. There are 4 round things that need a lick. You did the same for Chong, I saw them in your boot....know what I mean?? ![]() ![]() |
Author: | cush [ Fri Oct 14, 2005 3:43 pm ] |
Post subject: | |
J_A_M wrote: There are 4 round things that need a lick.
is that you and a mate? ![]() |
Author: | drmini in aust [ Fri Oct 14, 2005 3:48 pm ] |
Post subject: | |
J_A_M wrote: yea I was going to get another wheel alignment
![]() Hey if you want beer, I have a small job worthy of a slab. There are 4 round things that need a lick. You did the same for Chong, I saw them in your boot....know what I mean?? ![]() ![]() No problemo... ![]() Will do next week if you drop them over. |
Page 1 of 2 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |