| ausmini https://www.ausmini.com/forums/ |
|
| How do i tell the capacity of a mini engine https://www.ausmini.com/forums/viewtopic.php?f=2&t=12157 |
Page 1 of 1 |
| Author: | shane [ Fri Oct 14, 2005 6:29 pm ] |
| Post subject: | How do i tell the capacity of a mini engine |
i have a mini engine out of a car and was wondering if anybody could help me find out what size it is???? |
|
| Author: | shane [ Fri Oct 14, 2005 6:59 pm ] |
| Post subject: | |
it has 12A450 on the side right underneath a big 850 does that 850 mean 849cc ????? |
|
| Author: | Convertible Mini [ Fri Oct 14, 2005 7:21 pm ] |
| Post subject: | Identifying Mini Engines. |
I have always gone by this rule for identifying Mini engines. Looking at engine number stamped on the top of the block just behind the water pump. Number starts with, 8...... = 850 (848) " 9........= 997 or 998 " 10..... = 1098 " 12.......=1275. |
|
| Author: | danidad [ Fri Oct 14, 2005 7:49 pm ] |
| Post subject: | |
pretty good advice there convertable mini..i recently found out that bobs motor was in fact an 1100..I had prevoiusly just taken it for granted that it was 998 as the previous owner said it was, and i never even thought to look LOL |
|
| Author: | shane [ Fri Oct 14, 2005 8:17 pm ] |
| Post subject: | |
Yep that was good advice i never even knew thos numbers were there, too much rust and dirt. I have an 848. I also found this page which goes into detail if anyone is interested. http://www.bretts.com.au/~con/mini/engnrtmp.html |
|
| Author: | danidad [ Fri Oct 14, 2005 8:28 pm ] |
| Post subject: | |
pretty good link. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|