Tower usually has studs. Post something in the wanted section. Someone might post you some for nix.
I couldn't find a better picture of mine than this:
| ausmini https://www.ausmini.com/forums/ |
|
| A few Questions https://www.ausmini.com/forums/viewtopic.php?f=2&t=12244 |
Page 1 of 1 |
| Author: | The Toolman [ Mon Oct 17, 2005 1:41 pm ] |
| Post subject: | A few Questions |
Hi All, I have a few questions, 1. Does anyone know the Ohm range of the mini's fuel sender, I'm looking at purchasing some gauges and need to know this to get the correct one.. 2. I have a set of dry subframes waiting to be fitted, what I need to know is the size/thread of the four top mounting bolts on the front subframe as it didn't come with any... Thanks Mat |
|
| Author: | Zizzle [ Mon Oct 17, 2005 1:52 pm ] |
| Post subject: | |
1. Off the top of my head, pretty low, around 50 or 100 or 200 Ohms if I remember correctly. Why don't you just measure it? 2. Dunno which bolts you mean. The ones that go into the towers? Or the ones that go into the front beaver pannel? |
|
| Author: | The Toolman [ Mon Oct 17, 2005 2:04 pm ] |
| Post subject: | |
Sorry I should have been more specific... The ones that go into the towers. Mat |
|
| Author: | Zizzle [ Mon Oct 17, 2005 7:36 pm ] |
| Post subject: | |
Tower usually has studs. Post something in the wanted section. Someone might post you some for nix. I couldn't find a better picture of mine than this:
|
|
| Author: | drmini in aust [ Mon Oct 17, 2005 7:43 pm ] |
| Post subject: | |
Dry cars here had studs, wet ones all had bolts. Why? NFI.... 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|