hey fellas, hit a progress brick wall today,

ive got the wiper motor loose from the firewall, but how do i get the wiper arm control thing from inside the engine bay at the top of the firewall???

ive got the wiper arms off, and there is a nut behind wiper (behind the bonnet infront of the widnscreen) that i tryed to undo but the entire nut and thread move together, been looking at all my leyland and morris books but none have a detailed description,

any help in this regard would be awsum....as i am lost with this one!

blake

_________________
ausmini member 195

71K 'Kaye', KAZZ69's work in progress
66 panelvan, going no where fast...
71 MS75 toyota crown COUPE yes A COUPE!
76 ra23 celica wid 1ggte, GT3071r, 13.5@106mph with alot of spinin....

wheels keep on turnin!

Have a read in here

http://www.ausmini.com/forums/viewtopic.php?t=4917

so theres no trik to getting the wheel box nuts undone...... so i have to cut them off???

no other trick to get them off in one piece?

blake

_________________
ausmini member 195

71K 'Kaye', KAZZ69's work in progress
66 panelvan, going no where fast...
71 MS75 toyota crown COUPE yes A COUPE!
76 ra23 celica wid 1ggte, GT3071r, 13.5@106mph with alot of spinin....

wheels keep on turnin!

Apart from Lots of WD40 and let it soak to loosen off, I can only suggest pushing the wheel box upwards from underneith so that the nut is not jamming while you turn it. you prolly have tried that alrady.

Good luck

i'll hit it with wd40 tonoght and hope she comes apart tomorow arvo,

blake

_________________
ausmini member 195

71K 'Kaye', KAZZ69's work in progress
66 panelvan, going no where fast...
71 MS75 toyota crown COUPE yes A COUPE!
76 ra23 celica wid 1ggte, GT3071r, 13.5@106mph with alot of spinin....

wheels keep on turnin!

Cut nuts carefully on 1 side with an angle grinder. You can buy new chrome nuts. 2 types- 6 sided (early) & 8 sided (late). But threads same I think..

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.